jonsered

Jonsered XG (52mm, 85cc) in excellent condition. Same story as the XF that I posted. Piece missing from the front of the top cover near the muffler other than that in excellent condition. Paint is RED and very nice. Saw has been run more than the XF but still not much from the looks of it. Good...

Jonsered XF (56mm 110cc)in excellent condition. Came from a Swedish guy that has been cleaning out his collection for several years. The pictures tell the story on condition. Paint is RED and very nice. Excellent compression and saw fires on prime. I do not know a lot about these saws but I will...

Hey I've got it down to 3 potential saw moedwls on my own. 625,630 or a 670. I've spent 2 days young to figure this out on my own. I'd reallye like to know what it is because the piaton looks brand new. And there appears to be a velocity stack with k&n air filter. ImImJu getting my feet wet...

I just picked up a new-to-me Jonsered 801. Seller says it was just serviced, and it looks great! Couple issues, though. First, not really a big issue, but the off switch doesn't work. Instead, I can pull the choke and kill it. Next, it acts like I need to up the idle - won't stay running...

FS: Extremely low hour 1997 Jonsered 2065. All OEM no modifications. Has a standard 7pin PowerMate sprocket, pre-1998 EPA Zama C3M-2B carb, single felling spike, OEM muffler in perfect condition. This is a large mount saw and has the front chain tensioner which can easily be swapped to a side...

Hi guys, I may be crazy, but I am thinking about changing up my saw plan. I live on 60 acres, mostly wooded. I do not heat with wood, mostly trail maintenance, bonfires, and occasional feeling for a portable sawmill. I find I never use my little stihl 181, I barely use my ported 7910, and...

Have some various parts saws for trade or sale . I’m in need of some 288 xp parts

Husqvarna 545 fully rebuilt from the crank up with all NEW OEM parts. Cylinder, piston, ring, bearings, seals, case gaskets, lines, filters, clutch drum, oil worm gear, .325/7T sprocket, spark plug, etc. Pressure and vac tested 100% using OEM Husqvarna block-off plates. I have video of it...

Husqvarna 545/550xp cylinder in excellent condition no transfer, scoring, or other damage. It still has the cross hatching in the cylinder from the factory. P/N 577 76 47-06 Also fits Jonsered CS2252/2253 $50 Shipped

Selling a Jonsered/Husqvarna bar and chain combo package $100 shipped in the ConUS unless in you live in PST, please just ask for a shipping quote. 1x 24" Jonsered branded bar with almost no use "B" mount 84 DL 3/8" pitch .058" 1x Jonsered branded chain NIB 2x Windsor branded chains NIB 4x...

Got this Jonsered from another member on here for cheap. I don't see me rebuilding it or finding another parts saw anytime soon, so it's time to part it out. Still has good parts on it, but the muffler is shot, as well as piston and probably cylinder. Oil and fuel tank has some issues too as the...

What are you Jonsered dealers doing now that the brand is going out? Will you be looking for another brand? If so what are you thinking? We are a small Jonsered & DOLMAR dealer. Thanks , Doug

Red - Pending payment/Sold Blue - Pending (Someone asked for shipping but hasn't committed) I have a few chainsaws I would like to get rid of. I have my eye on a saw I would like to purchase so I am trying to liquidate some of my collection I don't use anymore. All of the prices listed below...

Making room for new toy. Brand new. Only opened box to inspect. Asking $850 plus shipping. PayPal please.

Evening folks Just got my hands on a CS 452VL needing some parts and work. I currently have an Alpina 360 and a Jonsered 2054 Turbo (20"). The Echo is heavier but more powerful, and looking at the spec is slightly later (early 80s?) as it has a chain brake. Is it worth the extra weight and power...

Hi folks, been lurking on this forum for a while and I need your help. I did a top end rebuild on a JONSERED CS2150 Turbo after it was run on straight gas and The cylinder walls and piston were scuffed bad! Now, it doesn't start. I tried putting some mix in the carb and holding the throttle...

$400. Cash and Carry only. Warner Robins GA. This stuff has to go. Everything that is a chainsaw in the pics - Nothing that isn't literally a chainsaw. ~29 saws all along the spectrum of greatness. McCullough, Poulan, Jonsered, Homelite. Bow saw, gear saw in a box (Mac 640), 2-man saws, 2 man...

I'm looking for information or opinions on an old Jonsereds 52e. Anybody know what it's worth if I can get it running?

I just got my 2095 back up and running and would like to get a new rear handle for it, I’m willing to pay up to $100 for a nice one!

I just picked up a jonsered tag says model 670 serial 9160589 but I can't find much info says super on side, I wanted to get a new bar and chain but at store says they fit 630 super,670 not 670 super any help would be appreciated