ported

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Chev727

    Ported Husqvarna 50 Rancher

    Been a while since I’ve posted on here, I’ve been getting into porting saws lately and just finished a silver tag open port 50 Rancher Does anyone have some advice on changes I could make to have it run faster if I did another one? I know it could use a bigger carb and a little transfer work...
  2. Husqvarna 41 Ported (480p_20fps_H264-128kbit_AAC).mp4

    Husqvarna 41 Ported (480p_20fps_H264-128kbit_AAC).mp4

    after 1 year in use
  3. Husqvarna 41 Ported in some oak

    Husqvarna 41 Ported in some oak

    My own firefood saw with bigger carb. cheapest chineese cylinder ive found on 3...2..1., ignition timing advance, muffler mod, raised exhaust port, stihl chi...
  4. IMG_20211229_225353.jpg

    IMG_20211229_225353.jpg

    Muffler mod
  5. NewEngland ChainSaw Works

    Sold Ported Husqvarna 357xp Chain Saw

    This saw runs and cuts great! This saw is a truly fun to chop logs with. We do this madness to get are name out there and to support ourselves in the timber sports industry. This saw has been ported and polished for high performance cutting. The cylinder is HIGHLY modified. The intake...
  6. S

    Will this ported 026/ms260 pull a 32 inch bar?!

    After rebuilding this turd saw from 2 different saws a ms260 and 026 i kept it mostly with 026 parts except 1 case half, so after bunch of testing and working up in steps to porting this 026 (48.7cc model) After not satisfied turning a 16 inch with 325 i start to port this saw I was on...
  7. NewEngland ChainSaw Works

    Sold Husqvrana 262 ported and polished

    Hello am selling a very nice Husqvarna 262xp saw. I got this saw in a trade. So, the story was it was the grand dad's saw and sat on self... blah... blah...blah... yadda yadda yadda . Needless to say the saw needed a piston :dumb2:. So this saw was completely taken down scrubbed doctor clean...
  8. GA_Boy

    Sold Ported Husqvarna 359

    Ported Husqvarna 359 For Sale. Ported, Pop-up piston, decked case and a muffler mod. 205 psi, New 18" bar and chain. Runs great, needs nothing but gas and oil. $345 plus the ride. If you don't want the bar/chain, we can work out a lower price.
  9. MAngelotti1

    Sold 50cc ported

    I am in search of a smaller ported saw for a friend. 50cc class preferably Stihl but open to husky as well. Anything out there?
  10. Everett Phillipston

    Want to Buy modded muffler for 390xp

    looking for a modded muffler for my stock 390xp. the saw has absolutely nothing done to it and i'm really not looking to open it up, but i would like to get whatever small gains are available by going to a modded muffler done by one of you fellas who have done this for years and knows what your...
  11. Yotaismygame

    I ported the Echo 2511T & muffler mod info

    Finally decided to tackle the little echo saw. I really didn’t think much of the saw stock. Slow chain speed, wrong bar and chain setup when stock. Chattering was an issue. It worked fine for cutting small limbs when up in a tree but that’s about it. Here’s the muffler part There really isn’t...
  12. NewEngland ChainSaw Works

    Sold Ported and Polished Husqvarna 372 x-torque

    https://www.youtube.com/edit?o=U&video_id=py1VC11iT8g For sale is an excellent Husqvarna 372 x-torque. This machine is in great shape. The piston and cylinder are OEM. We ported and polished the cylinder so it is a real screamer. It will come with the large felling spikes, 20 bar and 3/8...
  13. User Name Here

    Sold NLFS

    I have a Stihl 461 PHO ported by Mastermind Worksaws. It has an unlimited 460 coil and muffler outlet has been opened up. I'm the only owner. The saw runs great, has only been used for firewood - probably 6-7 cords of run time since new. I don't have compression reading but am posting piston...
  14. FLchainsawJoe

    Want to Buy Ported top handle saws

    Want some extreme top handle saws. Have MS200T and Echo cs341 stock which are good saws but wanting even more speed/power out of a 35cc. I’ve seen some on YouTube that really scream. I may modify mine but if you’ve already done the work even better. On a side note: 50cc and under ported saws are...
  15. vtfirewood

    North NJ/NEPA saw builder? Ms361

    I'm looking to get work done to my Stihl MS 361. It's 11 yrs old now and I could use more power. I mostly use a 20" bar with full skip Oregon chain but also use a 25" bar for the bigger trees. Does anyone know of a local saw builder or do I need to get in contact with one of the builders on...
  16. Kegerator5

    Want to Sell 6 Redmax saws

    Looking to sell some of my Redmax saws. I have 3 g3100T. If memory serves me correctly, one needs a new flywheel and Both side covers and that's it. Another needs tubing and adjustment. And the last was scored. I planned to use the scored one to put into the first one and have 2. But, I'm not a...
  17. wildman ben

    372xp top end on an x-torque

    So I've heard of guys doing this and know it can be done and all that, but is it just as simple as removing the piston and cylinder from the XT and putting in the P&C from a non XT in there? or do other components need to be switched out also? nextly, do they still manufacture OEM non x-torque...
  18. I

    Want to Sell Mobil 1 Racing 2T, Synthetic 2 cycle oil, 6-quart cases

    I have 7 6-quart cases of Mobil 1 Racing 2T for sale, (dyed red) bottles are factory sealed . Selling for $100.00 per case ($16.67 per quart) with a $25 flat shipping fee. Message me if interested. Discontinued for sale in America in 2007, this is considerably less than buying from overseas...
  19. wildman ben

    saw shop to mod my saw PNW

    Hey all, on the verge of buying a 372xp xtorq, not sure if you can buy the non XT anymore or which is better, but I was thinking to put a big bore kit in it, and lightly porting it also. and I imagine the ignition would need to be adjusted with these mods also. Living in B.C. Canada we have...
  20. User Name Here

    MMWS Stihl 461 vs. Dolmar 7900 ported?

    I currently have a Stihl 461 ported by MMWS. I love the saw! It cuts great, starts easily and is a very fun saw. Now here's where the question comes in. I have always been partial to Stihl. I know this is a very debated topic as to whether Stihl is the best or not - I like them and never had...
Back
Top