• ArboristSite has decided that due to the abusive interactions users are having with each other in the political forum, we will no longer be providing a place to talk politics on this forum. Any political posts will be deleted once discovered or reported to us. We are sorry for this inconvenience.

ArboristSite.com Sponsors
www.harvesterbars.com


poulan

  1. a_cmc_2b

    Saw Cranks, Runs Good, then Dies when it warms up?

    I have a Poulan Pro Model PP4218AVX that I put a new Carburetor, fuel lines, in tank filter, & primer bulb on a few months back, and once I got it(carb) set, the saw has cranked and ran fine, but it never fails that after about 15 to 20 minutes of use, it starts to act like it is running out of...
  2. S

    Poulan 2700/2800 crank seal replacement

    Does anyone know how to get a new crank seal over the oiler screw on the clutch side of the crank on a Poulan 2700/2800/3000? I had to wreck the old one getting it out and don't want to wreck the new one (flywheel side was easy). I have looked everywhere online - nothing about seal replacement...
  3. HollyD0322

    Poulan and mccolloch

    Can u use the muffler from a poulan on a mccolloch chain saw? If not what will work with the brand mccolloch? Tia
  4. AuerX

    Want to Sell Poulan Pro PP5020AV, 16" Forester bar with 2 spare chains.

    Poulan Pro PP5020AV 16" Forester bar with 2 new spare chains and a spare air filter. In good shape, never used anything but Tru-Fuel. Runs and operates as it should. I simply don't use it enough and hate to see it just sitting there. $125 No shipping, Sorry. Located in area code 18042.
  5. G

    Poulan farmhand 2900 super clean oil:gas mix

    Dad just gave me his old 20” Poulan farmhand 2900 super clean saw.. about 25 years old still runs. Says on the manufacturers label to combine 8oz oil per gallon gas. He never did. Always put a small 2.6 oz container per gallon. Seems like an awful lot of oil for a gallon of gas. Understand it...
  6. Reggie

    Craftsman / Poulan Carb Part number confusion

    I have wasted a good bit of time trying to rebuild carbs for two 18" Craftsman Chainsaws. I have decided to start from scratch and buy new carb kits for both, but I have now learned the hard way that there seem to be a million different configs and part numbers out there. #1 is Craftsman Saw...
  7. C

    Want to buy Piston rings (thin) for Poulan 3700

    For the life of me, I can't track down a source for the thin style piston rings for my Poulan 3700. I can only find the thick ones. If you have any new thin ones for sale, or know of a compatible option, please let me know. The bore is a hair shy of 48mm, the ring's flat-width is about 0.5mm...
  8. Aaron Rybicki

    Why do you choose McCulloch?

    What draws people to McCulloch saws? I've ran Homelite, Poulan, Stihl, Lombard (Knock Off), etc, and so on, but nothing matches the experience that McCulloch gives. For me, especially, it's the 10-10 series. With the double louvered muffler.... It is louder than all hell. I love it. I can...
  9. Aaron Rybicki

    Dynamark 39 CC Chainsaw??

    This is my brother in law's saw. It is a Dynamark 39CC saw. Not a whole lot of information on similar saws anywhere. I've seen in other threads that this saw is basically a rebadged Lombard saw. Anyone have any info on approximate year or bar mount? I thought I seen somewhere that it was A061...
  10. Aaron Rybicki

    Any Saw Collectors up Michigan way?

    Just wondering if there are any chainsaw collectors around my neck of the woods. I'm up in Manistee County, MI. I'm starting a collection myself. Mostly 70s Macs. I can't be the only one around here with the Yellow Fever. But if you collect any type and live nearby, gimmie a shout.
  11. 20190207_165035

    20190207_165035

    Can anyone identify this poulan is it a 3500 or 3600 I have 2 3500 and they have different exhaust
  12. L

    Wanted poulan 3750

    Wanted to buy 3750 poulan for my collection contact me @ 5707659659 thanks
  13. R

    Poulan Vibe 3400 Pulley

    Hello I am looking for Poulan vibe 3400 Pulley part 530069290. Does anyone know if a 530069291 will work, it looks similar but it's for weedeater ? I also found a Husquvarna pulley with same 530069290 part number but no pic for it, is that interchangeable? Any help would be appreciated...
  14. Lowell B

    Want to Sell Poulan 5200 Countervibe

    I bought this at a garage sale as a project. It was a lot of fun. No carbon build up on the piston and seemed to be lightly used. I did a good cleaning replaced fuel lines and filter and it took off. I used it once to cut the logs in the picture. I started it up a few months ago just to hear it...
  15. Aaron Rybicki

    Want to buy Poulan 245A/306A

    Looking to purchase a running Poulan 245A or 306A if anyone has one for sale. If anyone has one that they are willing to sell, please feel free to post some pictures of it on here. Thanks
  16. TwoStrokeTechMike

    Looking for Tyrol or Key Poulan

    I met a very interesting lady here in Boise, Idaho yesterday who said her birth name was Sarah Poulan. Said her Daddy was Claude Poulan. We sat and talked for awhile and she had an amazing memory of her life with her Daddy and Uncles when they founded Poulan Co. and her Daddy invented the bow. I...
  17. rxpx40

    Want to buy Poulan 3400 clutch/sprocket

    I am in the process of resurrecting an old countervibe 3400. The sprocket looks worn as expected. Viewing parts fiche, it looks like the sprocket is part of the clutch. I'd like to replace the sprocket if I can find a new one. Does anyone have a line on this item? TIA, Chris
  18. Lowell B

    Wizard 2000

    A friend gave this to me. Not a lot of info on this. I have never seen the tip of a bar like this,
  19. M

    Poulan overheat work around?

    I've got a couple of Poulan 40-something cc 18" saws that I've had for a number of years. For light duty use they run well and cut fine, but for major cutting they both will overheat and quit until they cool off. For example, we had to remove a large cedar tree and after several minutes of...
  20. H

    Poulan Pro 205 help

    My grandpa had a Poulan Pro 205 that sat in his garage for years unused due to a broken starter pulley that he never replaced. He gave it to me and I replaced the pulley and had it running. Decided to take it all apart and give it a good cleaning. I opted to use Fuel resistant permatex in place...
Top