seals

Hi, My Dolmar crank bearing and seal design appears different than other saws. First, the crank seals are not sold separately from the bearings, so apparently they’re a unit and are replaced as such. Second, it looks like they can’t be removed from the outside. There are three ‘tabs’ that look...

Does anyone know how to get a new crank seal over the oiler screw on the clutch side of the crank on a Poulan 2700/2800/3000? I had to wreck the old one getting it out and don't want to wreck the new one (flywheel side was easy). I have looked everywhere online - nothing about seal replacement...

I picked up a cheap locked up Husky 350 to rebuild. I figured it would be smart to go ahead and replace the seals while I have it torn apart. Does anyone know of any decent aftermarket seals? I haven't had much luck finding OEM ones. Thank you!

Does anyone have a generic part number or size of the Husqvarna crank seal 505 27 57-19 ?

Huztl has a few tools Stihl guys need. If you don't have them you can now. We need to see the quality but maybe since its all steel they will be great. If you buy these post here and let us know if others can order with confidence. Handy is an accurate term. Service Tool AS Case...

DISCLAIMER: If you would like to skip the novel that I apparently wrote below please feel free to skip the question in bold at the bottom of my post lol! Hello All! I have lurked here for some time and have learned a ton so I will begin by saying thank you for my chainsaw education to date and...

I'm about to do my first top end rebuild. I want to replace the crank bearings and seals too, just to be safe. Will I need any special tools for this? What is the trick for getting them off, and getting the case split?

Hi all,will a large syringe produce enough vacume to test crank seals in say a066. Cheers,Chris.

Have not yet torn down my 031AV that had the loose muffler. But have been mulling what I know so far 1. Muffler flange was broken and muffler loose. That affected running for sure. 2. With top cover off I was able to ever so slightly move flywheel up and down and feel a click. Not sure if this...