sold!!!

Here is one of the large amount of saws that I would like to re-home. As you can see she has been well used and shows the damage of a well used life. There is no recoil pulley, the flywheel is missing fins, and I am sure there are other issues. It should be considered a full project. It...

I have a dolmar 133 PHO with good spark and clean piston/cylinder want to trade for husqvarna 272 or 372. Let me know if I am in left field. Thanks for looking Tony

This old beast fired up with a little love! It’s more manly than I can handle I think. Has an Oregon roller nose 28” with .404 063 chain. Needs a new handle/handle brace, and a new chain. I bought it from the original owners daughter. He was in his 90s when he passed, ol’ North Idaho rancher...

I have a new Stihl 25" Rollomatic ES bar and two new Stihl chains. Bar is 3003 000 9431 3/8# 0.063" with Stihl sheath. First chain is Stihl 3664 005 0084 36 RM3 84. In the box. Second chain was purchased on eBay as the same chain. It appears to not be in the correct box, so all I will say is...

Was in my shed today and found this.I bought it a couple years ago from computerguy or someone like that that on this site.I cleaned and clear coated the top cover,clutch cover and recoil cover as per Brad.I installed a Meteor piston which is not windowed like the stock one.Will include used...

Picked these up last year and have only run it to see how they are. Been sitting on my shelf and I’ll likely never use them. The 262xp is a 1990 model with K&S cylinder and 87 carb. Real good shape with comp of 155. Looks like the base gasket is there. Has a 20” bar and good chain. Looking to...

I have for sale my very nice Husqvarna 372xp I bought it to drop a few larger trees on my property. I have a 353 and 359 this is just not used as most trees are 18" or smaller. I'll post pictures very soon. All stock with exceptions to muffler mod. $650 shipped for power end.

041 Super. Just inspected the topend and all looks good, piston looks good, cylinder is excellent but one bolt that holds the rear handle to the saw broke off. I was going to weld a nut on the stud and back it out but never got to it. Crack in the rear handle as pictured and one damaged bolt...

Willing to trade a clean Dolmar 6100 with new 20” bar and chain and extra air filter for a REALLY CLEAN Echo 590 with 20” bar. :laughing: Go ahead and laugh, I just like the feel of the Echo better. SOLD.