stihl 026

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. F

    Stihl 026 common problem (hard to start)

    Hi, just got a 026 from a friend a he told me that he can not start (hard to start) it he needs to pull it 12 to star. our local Stihl dealer look at it and told us that is a model defect. do you know something that I can do for that This was only use for 10 contracts and stored is like new...
  2. F

    Want to Buy stihl 026 air filter cover (old style, not ms260 cover)

    Hey im lookin for an air filter cover for a stihl 026 and have had no luck in finding one, wondering if anyone here has one or knows where to get one. Thanks
  3. D

    026 arguing with me.

    Hello all, I have spent alot of time on this site but this is my first post for help. Stihl 026 issues Okay, so here’s my story. I have been wanting to get a Stihl 026 for a while now. I have an old 031 and an 011 and wanted something newer. An 026 PRO showed up not too far away at an ok...
  4. northwest saws

    Want to Buy Stihl 026 parts

    Hello folks, I am in need of some parts for the non-pro 026 saws. Specifically I need an oil pump, the non adjustable plastic type. I could also use a top cover and maybe a filter cover as well, they would need to be in real good shape though. Thanks!
  5. B

    Want to Sell Want to trade

    I have several stihl chainsaw parts for (6)031Av (1)MS 250/025 (2)026 (4)028, just let me know what you need and I will let you know if I have it. Most likely I will.
  6. J

    Potential headscratcher - Is there anything wrong with my Stihl 026?

    Hi all, I have an early model Stihl 026 (with the red master control switch) that is in decent shape for it's age. I'm not the original owner and bought it second hand. I recently replaced the air filter, carb, fuel line and impulse line with new Stihl OEM parts. The saw holds pressure and...
  7. S

    Does this looked like a scored P&C to you??

    i just rebuilt my carb replaced my fuel and Impulse lines. When I tried to fire up the saw first pull felt ok. The 2nd lacking compression and same on the 3rd. Checked compression and it’s ZERO! (I checked the gauge on another saw just to verify it wasn’t the gauge. Pulled muffler, piston looked...
  8. Belegedhel

    Stihl 026 non-start mystery

    So this one has me stumped (no pun intended). I have just inherited a Stihl 026 saw. Brother in-law says it was running fine one day, and the very next day, it woudn't start, and hasn't started since. It has compression, and it has spark. The choke on the air filter is not stuck, and working...
  9. Armbru84

    Sold Stihl 026 Red Lever

    Nice 026. Jug has a decomp but I plugged it. New OEM fuel line and filter. Also new throttle linkage. Put a nice OEM air filter cover and top cover on it. Overall pretty clean saw. Has some etching by the clutch as shown but it’s relatively clean. Compression is 165 ish. Saw has fixed H carb on...
  10. Armbru84

    Sold 026 Air Filter Cover

    Looking for a 026 air filter cover. Looking for one in decent shape with no cracks. Top cover is faded so it can be faded as well.
  11. G

    Stihl 026 will not start

    Gonna tackle a Stihl 026 that will not start. Bought it and the guy said it was finicky in the cold, but he had put new hoses on it a year ago. 1. Could anybody hook me up with the repair manual and IPC? 2. Any ideas of where to start other than change out gas filter and clean carb? 3.Also...
  12. mrcommercial

    Another 024/026 thred...oh goodie..

    Alrighty, I've got what I think is an 024AV. Model number on the side of the piston is 42ZN12....which I think is an 024 jug (42cc). if it were an 026 it would say 44 instead of the 42. My question is, I'd like to resurrect this turd as an 026 as I've already got a decent 024AVWB with a 16"...
  13. r black

    Sold sold relisting bars and chains

    have 1 crank case 372 xp (non-xtorq) un-split with good crank and bearings (no tag) also have a muffler assembly and outer bucking spike and new gasket kit and compression release button .......... and stihl 026 carburetor Makita 20 bar and chain.... stihl ms192 14 inch bar and chain...
  14. bikemike

    Carb bore info thread for retro fits

    Looking to find out the main bore and venturi bore for stihl 034 av super and stihl 044. I'd like to put a bigger carb om my 026 woody pro.
Back
Top