stihl

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    Sold *PENDING SALE* Stihl 044 - 10mm saw

    Stihl 044 with 20” bar and new Oregon PowerCut chain. I am 2nd owner after buying from a cousin’s estate 2 years ago. Has been a firewood and farm saw all its life and never abused as you can see in pics. Runs strong just have too many saws so this one doesn’t get used much. Based on my...
  2. S

    Meted piston?

    Hi everyone I recently noticed my ms361 was running rough and decided to take a look at the piston and rings. When taking the cylinder off I noticed that the top of the piston looks melted? I could use some help finding out what happened.. thanks guys!
  3. Stchainsaw69

    084 service manual

    I know it’s been asked 1 million times but does anyone have a repair manual for the 084? First one I have worked on and never used the Oiler override button before. Thanks in advance.
  4. Jeppsonservices

    Want to Sell Built 066 red light worth?

    What would this 066 red light sell for. New Hyway pop up big bore piston and head. New torch spark plug new handle not shown in pic. New ignition coil and plug wire new fuel line, new impulse line, and ported exhaust, might be installing ceramic bearings heard they’re good but not sure if...
  5. dwain

    026 question & hello from Aus!

    HELLO/INTRO: Hello there! I'm a newbie to the site and a little green with chainsaws too. BUT I'm making up for lost time, as I've seriously caught the chainsaw bug. As I review tools over here, I already have a couple of small ones I didn't have to buy (Echo 352 and Dewalt 60V max). But I'm...
  6. BrianCT

    Want to Buy 201t

    Hello, looking for a 201t ported if anyone on here does this and is looking to sell. Thanks
  7. A

    powerhead advice for Alaskan MKIV mill

    Looking at getting a MKIV mill for small milling projects using mostly green white spruce under 30" in diameter and maybe some green paper birch under 24" diameter. Biggest saw I own is a Stihl 271 which is only 50cc and probably not cut out for the job. Looking for some advice on what Stihls...
  8. F

    026 Find - With a cool history!

    Hey everyone! Just thought I would share what I discovered after buying a nice used 026. In the last picture, for any of you boaters out there, maybe even some non-boaters from Michigan, Charlie Winn was a founder of Four Winns boats. I put it together after starring at it and thinking about...
  9. P

    Stihl help need PDFs

    does anyone have a PDF of the illustrative parts list and workshop manual for the MS 462-CM and MS 194T?
  10. JaredR

    Stihl 261s Scoring the Cylinder

    Hi all, I'm new to the forum and looking for some answers. We recently started building handcrafted log homes so I went to the local Stihl dealer and bought a 261 C-M for our notching and small saw work. After using it a few days (less than 10 hours on the saw) it wasn't starting and obviously...
  11. M

    MS461 carb adjustment: RPM too high on full throtle

    I’m trying to adjust the carburetor on my MS461 and I have 2 problems: 1- I cannot lower the RPM on full throttle below 13800. 2- when the saw is idling (2800-2900rpm), the chain run a little bit (it moves a inch every 1-2 seconds). Is that normal? Thanks
  12. kris1804

    Stihl 015L replacements

    Hi there I recently bought an old Stihl 015L and I have been taking it apart and ordering spare parts that I could find etc. and I have of course noticed how expensive it is to buy a new 3/8 sprocket. The spur gear i have found this https://www.thingiverse.com/thing:518513 and will try a 3D...
  13. AgTech4020

    Sold Stihl 201T C-M with less the 2 hrs use

    This saw has less then two hours of use. I had my dealer scan it last week to verify the usage and make sure it had the latest firmware. (See picture) I bought it at a time when I thought I needed a saw that could be operated with one hand (due to a shoulder injury). It turns out this light...
  14. Tswarner67

    Want to Buy Stihl 038av VS 036 Pro or new??

    Alright guys I’m new here but already tell a lot of you have a saw addiction and I am quickly catching that bug. I heat my house And barn with a wood burner So I split and cut a ton year round. I want to get MY first saw, I’ve been using grandpas old mcculloch for years and am ready to by my...
  15. N

    Tuning a new husky help!

    Hey fellas, I opened up my new 445e muffler a little bit (drilled Two 1/4 inch holes and removed spark arrestor) I have the tool to adjust the carb. I believe I have it four stroking and it cleans up well in the cut. After a few hard hours the plug looks pretty lean, if I back the H screw out...
  16. F-M tree

    Sold 026/260 parts

    Trying to free up some garage space so I’m trying to offload my 026 stuff.. would like to sell all as a whole but can do individual... $450 takes the whole thing (whole chainsaws not included)... price is negotiable can ship from ND at cost. 13 carbs plus other pieces, 3 recoils, 16 cylinders...
  17. I

    Want to Buy Stihl 041AV air filter base/choke lever/choke rod

    Hello, I am new to this site and was referred here by a buddy. I have a love for saws and work on them frequently. My grandfather owned a logging company in Michigan and I worked with him as a young man. Anyways, I am working on a Stihl 041AV Super Electronic. A friend was gifted it from his dad...
  18. PlinkerMan

    ISO Stihl BR 550 Crankshaft

    Anybody have a working Stihl BR 550 Craftshaft part no: 4282 030 0404 ?? My bearings are shot. Actually, only need the bearings but the whole unit is one part. I believe the crankshaft for my unit is same part as BR500, BR550, BR600, & BR700. Willing to buy or trade chainsaw parts for your...
  19. G

    Ms291 scored piston!

    Hello I purchased a Stihl ms291 last August and saw is acting up this spring. After doing a little reading, I decided to take a look at the piston through the muffler port. There appears to be scoring and rings seem very tight.(pictures attachted) Just wondering my path forward? I’m planning...
  20. F

    Stihl sharpening gadgets worth getting?

    Hi, I had bought an electric sharpener at first and then realised that I needed to change the disk as it was too small for my chains (I didn't know about chain characteristics at first), so I stopped using it and just got a some files and holders to do them by hand which I have some success...
Back
Top