vermeer

Price: $12,500.00 Location: Northern Virginia Good running 12" Capacity Vermeer Disc Chipper with dual vertical feed wheels. Super loyal 84hp Perkins pre-emissions diesel motor (non-turbo). Looks rough but has been well maintained. Recent work: New front and rear main bearings. New radiator...

Is anyone familiar with this 1600A panel ? I couldn’t find the throttle control and choke if any. I couldn’t figure out how to start. It’s starting and stopping. There is a red button right next to the ignition switch. Thanks for your help.

Hey guys. Needing advice. Here in northern Australia. Updating my backup chipper to a late model 18 inch. looking at two models Vermeer bc1800xl and a bandit 1590xp or possibly the 1890xp hd Now I’ve never had the pleasure of running bandit. I’ve owned a bc 1500 and a bc1400Xl Both to your...

So I'm running a small tree trim/removal business and need to start looking at buying a stump grinder. I was thinking about steering toward buying a Vermeer grinder because there is vermeer dealer close by that could service it for me if need be. Whats the best small/mid sized vermeer stump...

Looking to see if anyone has a model SC1152 stump grinder for sale with decent hours on it. I’m located in canton Ohio. I know finding these machines for sale is rare so travel is an option for me.

Who has experience with this 6” chipper? Can you compare with a Vermeer BC625A? Thanks!

Been having problems with my 672 stump grinder. Oil temp light comes on after a while when using. I’ve had it looked at and checked and no one can find why it’s coming on after it being under load. I do think I have an injector issue but that wouldn’t make the oil temp light come on would it...

Been thinking about buying the green teeth upgrade which has 900 series with a total of 6 teeth , but currently have 32 new 700 series of teeth can i do the upgrade with my current 700 series teeth and pockets if so what’s the correct way of having the right pattern ? Thanks for any help

only about 50% of the time. The rpms will drop and the motor sounds like it's trying to sort a bad idle. This can also be caused if I take an ambitious bite or sweep on an angle in to the stump. High idle doesn't recover until I've either disengaged the head and rolled the dice again on...

My BC625A chipper is getting air (cavitation) in the hydraulic system. Everything seemed to be sealed between the hydraulic tank and the pump, but I replaced the hose just to be safe. Still getting air. Now I'm thinking I need to replace the pump. The Vermeer parts manual describes this as...

It's time I make the leap. I am looking for a dump truck and chipper of reasonable price and working condition. Bucket/chip combos are a possibility. If you have equipment to sell, send me the information with pictures and we can go from there. Thank you in advance for your responses!

Altec 60' Boom bucket truck 6 speed manual trans Forestry chip box dump body 2 outriggers Many updated parts - ready to work Former Asphlund Truck Hydraulic Brakes Bucket plumbed for hydraulic saws 8.1L gas engine Kubota diesel pony motor Pintle hitch Passed inspection 3 weeks ago 7k worth of...

Anyone selling one this summer?

looking at bandit 65 not sure of year but have serial number , the feed tray looks smaller compared to newer bandit 65's the feed springs are different more like a 45 degrees then the new straight vertical springs like the newer ones , the newer bandit 65 with wider tires look much bigger...

Looking for any information on a 20/70 morbark chipper gas 35hp Especially weight since towing on a smaller truck Any issues Thank you for any information

Just pickup up a Vermeer 665a stump grinder. I know they are old. I used them on my summer jobs off from college. This one has a wisconsin v465D. How do I figure what engine to swap the unit with. I know i bought it with issues and with the lack of parts I'd rather just sell the engine and put...

I have to grind several white pine stumps for new tree planting , I own a Vermeer 222/252 have grounded stumps deep before but never measured then , but the nusrsery wants them 16-24 below grade , looked up specs and 13 inches deep and looked at larger grinders which is still only 15 inches deep...

Hi all, newbie here, great site, I would like to post a question, I have a 2004 sc60tx stump grinder, no remote, the other day we unloaded off the trailer and was running to the stump when she shut down, I tried to restart and have nothing at the starter, I looked at the little window on the...

I am going to look at a late 80's 1230 Vermeer chipper but I'm unsure on what it is worth because I cannot find a similar one for sale anywhere so if anybody has any idea if 4000 is too much to pay for a machine that has 1700 on it? It seems to be in really good shape and I believe it has the...

Hey guys, My company is looking to purchase a new mini skid steer. Preferably a Vermeer s800tx. I have only found a handful online for sale. Does anyone on here know of any to purchase? I am located in Virginia but am willing to travel for it! Thanks!