Agent smith
NJ tornado enthusiast
So ive been messing around with porting for a little while now and I've started on this 028 super. First I'll start off with saying I've been doing research for a long time and i have been reading Jennings book trying to make sense of two stroke theory. Ive built a few good runners with the help of others on here and i wanted to share what im doing with this saw to see if im going in the right direction on my own. Advice is welcome. Here's what i started with #'s wise:
OEM 028 super jug no gasket
108° 144° duration
125° 110° duration
73°. 146° duration
.023 squish
OEM 028 super jug no gasket
108° 144° duration
125° 110° duration
73°. 146° duration
.023 squish