RED-85-Z51
Addicted to ArboristSite
It kicked on a prime last week after sitting over a decade, ive put on new impulse line, fuel line, new carb, new boot, scuffed the cylinder...
Has 125psi, which isn't ideal...but it should start.
Filed points, good, painful spark.
Cant pressure test because I loaned it to a friend for a few days, but, cylinder gasket is good, mag side seal is clean..dry. the clutch side...looks different.
It wont do anything, im just trying to get it to pop off spraying mix into the carb like i did before. Impulse is tight, boot is tight, can anyone verify this seal/bearing looks okay
Sent from my SM-G996U using Tapatalk
Has 125psi, which isn't ideal...but it should start.
Filed points, good, painful spark.
Cant pressure test because I loaned it to a friend for a few days, but, cylinder gasket is good, mag side seal is clean..dry. the clutch side...looks different.
It wont do anything, im just trying to get it to pop off spraying mix into the carb like i did before. Impulse is tight, boot is tight, can anyone verify this seal/bearing looks okay
Sent from my SM-G996U using Tapatalk