036 clutch drum and bearing confusion

[JJay03]

The ipl shows 4 different drums I see 2 that look like the one on my 361 with the sprocket being separate which is what ide like to go with on this 036pro. Looking for the 7t 3/8 sprocket and going to run a 20" bar. Anyone know what those part numbers are or can you make sense of what the difference is in the ipl? What does the * mean in the IPL anyway?

Thanks

 

[Mad Professor]

They upgraded the clutch to use a larger bearing.

You can get the whole setup as a kit.

The IPL should note the bearing sizes.

 

[JJay03]

Why does the artic have a different bearing hmm.
I notice there is a 10x16x12 bearing and a 10x13x10 so guess I should use the first choice.
I think I notice all the parts I need now but I dont see a kit p/n.

 

[Mad Professor]

here

 

[JJay03]

here

Awesome thanks

 

[esminbritt]

Well I'm famous for trying to revive old threads. I just picked up a, 036 pro. I believe it was made after 1995. Had they already updated the bearing at that point?

 

[HarleyT]

here...

 

[Mad Professor]

 

[Stihl 041S]

And some saw this upgrade can be used on the 029/039

Someone should check me.

 

[Mad Professor]

And some saw this upgrade can be used on the 029/039

Someone should check me.

you can put the small one on a 066 to run picco chain but not a good idea, they make picco rims now for the 066
(for milling)

 

[Stihl 041S]

you can put the small one on a 066 to run picco chain but not a good idea, they make picco rims now for the 066
(for milling)

I meant the 034 larger bearing and larger sprocket upgrade

like in your picture.

Part 1125-007-1041.....I THINK it also fits the 029/039 .......

that’s the one I meant.

And the LP Stihl chain Logosol sells(but Stihl doesn’t sell in the states) will take more HP than the regular LP

 

[DND 9000]

Part 1125-007-1041.....I THINK it also fits the 029/039 .......

It`s not used there. Set of rim sprocket (3/8 7T) including clutch drum on the 029, 039 is 1125 007 1002.

 

[Stihl 041S]

It`s not used there. Set of rim sprocket (3/8 7T) including clutch drum on the 029, 039 is 1125 007 1002.

Is that with the smaller bearing in the 029/039?

 

[SteveSr]

Is that with the smaller bearing in the 029/039?

My understanding is that the 034, 029/039 all started with the smaller bearing. The 034/036 were later upgraded to the larger bearing but the 029/039 were not. I don't know if a large bearing would work on the 029/039 or not.

 

[Stihl 041S]

My understanding is that the 034, 029/039 all started with the smaller bearing. The 034/036 were later upgraded to the larger bearing but the 029/039 were not. I don't know if a large bearing would work on the 029/039 or not.

With the different clutch drum I think they will.

 

[Mad Professor]

I meant the 034 larger bearing and larger sprocket upgrade

like in your picture.

Part 1125-007-1041.....I THINK it also fits the 029/039 .......

that’s the one I meant.

And the LP Stihl chain Logosol sells(but Stihl doesn’t sell in the states) will take more HP than the regular LP

same LP chain filed different. Stihl is an ass in this way, they have milling chains in most varieties the german turds won't sell USA.

 

[Stihl 041S]

same LP chain filed different. Stihl is an ass in this way, they have milling chains in most varieties the german turds won't sell USA.

No.....as I understand it takes more hp ......I’ll go check.
On edit.....found it.

Stihl 63PMX ripping chain is good for saws up to 95cc(Baileys says 38-100cc) So one web site said....Sugihara in the U.K.
exclusive by logosol here in the US. Don’t know about Canada

 

[DND 9000]

Is that with the smaller bearing in the 029/039?

Yes, there is the needle cage 9512 933 2260 (10*13*10) used.

The rim sprocket kit 1125 007 1041 used on 034, 036, MS 340, 360 needs the newer larger needle bearing 9512 933 2380 (10*16*12) which is included in that rim sprocket kit.

 

[Stihl 041S]

Yes, there is the needle cage 9512 933 2260 (10*13*10) used.

The rim sprocket kit 1125 007 1041 used on 034, 036, MS 340, 360 needs the newer larger needle bearing 9512 933 2380 (10*16*12)

The bearing is part of the retrofit kit 1125-007-1041.
Kit is clutch drum,E clip,washer, bigger bearing and a sprocket.

 

[DND 9000]

Yes I know. Corrected my post above. Thank you.