12mm 044 big bore

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

duckmansweb

ArboristSite Lurker
Joined
May 5, 2020
Messages
23
Reaction score
3
Location
Australia
Hi guys, will the MS460 jug and piston set work on my 12mm pin 044 ?
Thanks in advance
 

Attachments

  • s-l1600rrrr(1).jpg
    s-l1600rrrr(1).jpg
    268.8 KB · Views: 6
  • s-l1600 rerer(1).jpg
    s-l1600 rerer(1).jpg
    299.2 KB · Views: 6
I've done it, about 10 minutes with a round file to slot the cylinder bolt holes and a couple more minutes to relieve the flywheel side transfer hump to clear the flywheel and it bolted on like factory. I think I might have had to put a washer behind the front muffler holes to bolt it to the case but other than that it's a very simple mod.
 

Latest posts

Back
Top