cuinrearview
Red saw lover
So out of the LGBTQ this saw would be a "Q" for "questioning " what it is. This is the new millennium folks, perfectly acceptable .
You can become a Supporting Member which comes with a decal or just click here to donate.
MS460 is 77cc vs the J-red 2065 which is 65cc. 2071/2171 would be comparable to an MS440 at 71cc, although the J-Red/Husq have quad transfer ports.
I thought the 2065 was open port, but apparently some were closed port, or this one had a closed port jug swapped onto it at some point...
Here's a partial list of this series of Jonsered vs. Husqvarna saws.
2065 = 365 open port 65cc
2165 = 365 special closed port 65cc
2166 = 365 x-torq (detuned 2172/x-torq) 71cc
2071 = 371xp 71cc
2171 = 372xp OE 71cc
2172 = 372xp x-torq 71cc
The pic shows the top of the cylinder and it clearly has "48" stamped on it. I'm not sure if that means it's a 48mm or what???
Nothin' special about a real special...I just picked up a real 2165 special with a toasted piston. New OEM piston and woods ported for $400. It’s a runner.
Good deal, but you are out of line.I just picked up a real 2165 special with a toasted piston. New OEM piston and woods ported for $400. It’s a runner.
I'm alright with it. Probably a little butt hurt still about the whole open port closed port fiasco. In Canadian duckets he bought that saw for like $1.89 US. He should probably post it in the '18 "you suck" thread as well.Good deal, but you are out of line.
Enter your email address to join: