288XP New crank bearings and seals Seller from this site?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Bearings are 6203 C3. They should be readily available from SKF etc. Or any good bearing manufacturer. Seals are a different ball game. Although I’ve never had a problem with farmertec seals.
 
I put them in with the grease still in them. Gives them a gebtke brake in and mix will rinse it out pretty quick.
 
I oil the seals up when installing them and pre lube the bearings and crank pin through the intake port after it’s assembled.
 
Back
Top