hobobrando
ArboristSite Lurker
Well I pulled the muffler to have a peak at the piston and its surprisingly spotless. I've got some feelers out for a new or useable cylinder, and also have reached out to Dominant (who happen to be local to me) about bearings. Its going to be a slow build being my first and this also being my busy season but it should be a good learning experience.
Having already taken the muffler off I figured I might as well tinker with that real quick. I reversed the exit and removed the baffle behind it. I'll give it a good wire brush and hit it with some high temp paint when I reassemble.
Sent from my LM-V405 using Tapatalk
Having already taken the muffler off I figured I might as well tinker with that real quick. I reversed the exit and removed the baffle behind it. I'll give it a good wire brush and hit it with some high temp paint when I reassemble.
Sent from my LM-V405 using Tapatalk