• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy 298 husqvarna coil

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

meathead2

ArboristSite Lurker
Joined
Jan 31, 2013
Messages
8
Reaction score
0
Location
beach city ohio 44608
Would like to purchase a good used or NOS coil for my 298 husqvarna saw.
330 987 2220
 

Attachments

  • 20200412_220954.jpg
    20200412_220954.jpg
    4.8 MB · Views: 14
  • 20200412_021437.jpg
    20200412_021437.jpg
    1.5 MB · Views: 12
  • 20200412_221013.jpg
    20200412_221013.jpg
    3.8 MB · Views: 10
I believe a SEM stator from a 2100/2101 or other 100 cc saws will fit yours. Try eBay?
I believe a SEM stator from a 2100/2101 or other 100 cc saws will fit yours. Try eBay?
Long story with ebay. I have been even purchased a used 1. When it arrived the plug wire was worn nearly into. Making it unusable. So I tried a website claiming they had NOS ones in stock. Order 1 waited 10 days no update shipping wise took money out of account same day thou. When I contacted them they informed me they were out of stock. Website never said that. And until I called them about it they had done nothing about refunding my money. So thank you for cross references dealing with stator. I learned that alittle while ago while I've been researching this saw. Still looking for 1 thou.
 
I believe the wire pulls out on some of these stators to be changed.
Half to look into that. My original is epoxied in, so did the first one from ebay. So not sure how it could be replaced without removing the epoxy. Thanks again I'll see if I can find any threads showing that...
 
Back
Top