• Notice to all BUYERS. You are buying at your own risk. If you do not know the seller then please be cautious and look for suspicious activity. If they ask you to mail a check/money order or pay with PayPal using the Friends and Family option, that is a RED FLAG. Your purchase will not be protected. Only pay with credit card or PayPal using the goods and services options. Do not fall for the excuse that they don't want to pay the PayPal fees. They need to account for that in their sales price.
  • To all USERS that think they need to police the site. New users that come to sell items are not always selling stolen merchandise. No vigilante or lynch mob mentality is permitted. You will be given infraction points if you accuse someone of selling stolen merchandise without hard evidence. You must have the stolen item report with a serial number and/or pictures that match the for sale item to make such accusations. Alert the moderators with your evidence and they will take care of any transgressions. If you do not you will be given enough points for a 3 day time out.
  • Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


SOLD!!!! 372xp PHO MMWS

MnSam

MnSam

Addicted to ArboristSite
Joined
Nov 26, 2008
Messages
1,890
Location
SE Mn
I am downsizing and this one's going. This is a great saw with just a few tanks on it since the rebuild. It starts, runs, oils as you'd expect. Compression is very snappy. I have not invested in a nice compression tester. I assure you compression is what you'd expect for this saw. If there are issues with the saw when you receive it let me know. $575 shipped (lower 48). More pics coming.





 
MnSam

MnSam

Addicted to ArboristSite
Joined
Nov 26, 2008
Messages
1,890
Location
SE Mn
The front screw for the top cover is longer to reach past some shallow stripped threads. It is secure. (repair is the triangular shaped filled area in the center of the pic)


The top screw threads are broken out for the inner dog. I have fabricated a repair to secure it to the case using the muffler shield. It is secure.


Someone prior to me didn't index the new bar stud properly and the head popped a little hole in the case. This created a hole for the bar oil to leak out. I repaired it with some epoxy, I have had no leaks, it is tight.
 
MnSam

MnSam

Addicted to ArboristSite
Joined
Nov 26, 2008
Messages
1,890
Location
SE Mn
I think maybe? I have two interested, trying to finalize. You want to be third in line? I'm heading out for a bit, will check back later.
 
Westboastfaller

Westboastfaller

Addicted to ArboristSite
Joined
May 15, 2014
Messages
3,820
Location
Here
Man, this is a sweet one. A few hours too late!
I would say someone is a few hours early.
Unless the saw has a ground up rebuild then there is still a good possibility the strong top end will punch out the big end on the crank. It will usually happen in the first day. A couple tanks is not enough run time. I have experienced, seen and heard it happen many times. A builder can't warrantee what looks to be good and didn't hold up. The saw has a lot of indicatiors of high hours. Good for someone with other 372 for a swap over on a newer bottom end. I'm not trying to offend the OP or buyer, I'm just sharing experience. The saw have its worth no doubt.
 
MnSam

MnSam

Addicted to ArboristSite
Joined
Nov 26, 2008
Messages
1,890
Location
SE Mn
I would say someone is a few hours early.
Unless the saw has a ground up rebuild then there is still a good possibility the strong top end will punch out the big end on the crank. It will usually happen in the first day. A couple tanks is not enough run time. I have experienced, seen and heard it happen many times. A builder can't warrantee what looks to be good and didn't hold up. The saw has a lot of indicatiors of high hours. Good for someone with other 372 for a swap over on a newer bottom end. I'm not trying to offend the OP or buyer, I'm just sharing experience. The saw have its worth no doubt.
Hey, thanks for help with the sale.
 
MnSam

MnSam

Addicted to ArboristSite
Joined
Nov 26, 2008
Messages
1,890
Location
SE Mn
Randy does great work, bearings/seals where replaced when the saw was completely broke down during the rebuild. I have been kicking around selling this for a long time, I'm still not sure I should. I won't be sad if this saw doesn't sell.
 
Top