ArboristSite.com Sponsors
 
 


372XPW hose ID/routing, help, thanks...

Discussion in 'Chainsaw' started by RenaisSAWnceMan, Jul 28, 2019.

  1. RenaisSAWnceMan

    RenaisSAWnceMan ArboristSite Operative

    Joined:
    Apr 15, 2011
    Messages:
    327
    Likes Received:
    85
    Location:
    MA
    Was replacin' the air filter on the 372XPW, and noted a loose hose, which is, presumably, a vent hose, and...
    I assume, was originally routed through the hole at the right-rear of the carb box...

    Perhaps, someone can advise and confirm, thanks much.



    DSCN9964.JPG DSCN9965.JPG DSCN9966.JPG
     
  2. Chainsaw Jim

    Chainsaw Jim CJ Saws, LLC

    Joined:
    Jun 5, 2014
    Messages:
    2,915
    Likes Received:
    3,633
    Location:
    Springfield Oregon
    It connects to that green thing under the hole. It's the tank vent hose and it worked its way loose from the vent.
     
  3. RenaisSAWnceMan

    RenaisSAWnceMan ArboristSite Operative

    Joined:
    Apr 15, 2011
    Messages:
    327
    Likes Received:
    85
    Location:
    MA
    Ahhh, yes, if I'd looked a bit closer, with proper lighting, that woulda been obvious.

    Thanks very much!

    Sure is more plumbin' in this thing, than in the 394XP....
     

Share This Page