ArboristSite.com Sponsors
 
 


Want to Sell 50cc madness

Discussion in 'Chainsaws' started by cuinrearview, Sep 27, 2019.

  1. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    I realized I have far too many 50s right now. A couple of these I had planned on keeping around and playing with but the builder pile is growing and I've made a deal on a small cabin and land up north so the cash could come in handy. I will blow these off before shipping but I've been using them. I'll try and keep my descriptions a little more brief than usual. Feel free to ask questions. All prices are PHO, buyer pays shipping. I have some bars and chains that could be added for a small cost. Just let me know what you're looking for. The Sugi on the weed whip saw is NFS.

    Husqvarna 350. OEM cylinder with the intake and exhaust widened. Lowers and bearing cup smoothed. .010 off of the top of the bearing cup surface. No base gasket. 185psi with a Hyway popup piston. Aftermarket muffler opened up. $185
    20190926_190558.jpg 20190926_190540.jpg 20190926_190548.jpg 20190926_190531.jpg
     
  2. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    SOLD2152 with a Hyway quad port cylinder and flat top piston. No base gasket. Little hole in front of muffler and missing one top cover clip. Some orange overspray on top. Runs good. $250
    20190926_190825.jpg 20190926_190833.jpg 20190926_190810.jpg 20190926_190817.jpg 20190926_190800.jpg
     
    PA Dan, Ronie, Adam08ski and 3 others like this.
  3. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    The weed whip 346xp. I split the cases and added crank stuffers from a 545fx weedeater. New Nachi bearings, OEM seals, meteor piston and Caber ring. Carb re-built with Walbro kit. Cleaned up OEM NE cylinder. It's ugly(on purpose) but mechanically pretty much new. $300
    20190926_190920.jpg 20190926_190925.jpg 20190926_190953.jpg 20190926_190933.jpg 20190926_190940.jpg
     
    PA Dan, David Young, mbrick and 8 others like this.
  4. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    SOLDDolmar 5105 easy start. 5100s muffler. Runs great but it has a weird vibration that I haven't been able to track down. If I find anything I'll update. All OEM. $225
    20190926_190644.jpg 20190926_190700.jpg 20190926_190713.jpg 20190926_190652.jpg
     
    Ronie, Adam08ski, brad ruch and 2 others like this.
  5. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    2152/3. Runs really well. Base gasket delete, timing advance, and muffler mod. New fuel line, meteor piston, carb kit. NE jug has most of the top fin missing and the second one welded. Very easy starting with the primer bulb. I plugged the decomp. I just finished building this, tuned and made a couple cuts last night. I have more pics of the build if anyone is interested. $350
    20190925_194448.jpg 20190925_194455.jpg 20190925_194337.jpg 20190926_163437.jpg 20190925_194609.jpg 20190926_163451.jpg
     
    svk, Duce, Ronie and 8 others like this.
  6. Johnmn

    Johnmn ArboristSite Operative

    Joined:
    Feb 22, 2015
    Messages:
    439
    Likes Received:
    474
    Location:
    Minnesota
    Why tempt me with the red and black ones?!?!?!
     
  7. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    The last one is a real nice runner. I didn't touch the ports either.
     
    Ronie likes this.
  8. Trent Curtis

    Trent Curtis ArboristSite Guru

    Joined:
    Sep 29, 2016
    Messages:
    611
    Likes Received:
    706
    Location:
    Boise, ID
    Interesting build on the 346, Tim!

    We would love to see a vid of your weed whip in action! :)

    Bump for a Great seller
     
    chipper1, Ronie and cuinrearview like this.
  9. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    I did a build thread with vid over on the other site. It needs a sharp self feeding chain and a light hand to really shine. If I was more knowledgable on porting theory I think there's a way to make the stuffers work but a 346 is set up pretty well from the factory.
     
  10. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    Here ya go Trent. This was right after I finished it. I've since used a better chain and gotten a little more used to how it makes it's power.
     
    Ronie and Trent Curtis like this.
  11. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    This is the 350 right after I finished it with a real aggressive chain.
     
    Ronie, 78bronco and Trent Curtis like this.
  12. brad ruch

    brad ruch ArboristSite Guru

    Joined:
    Aug 16, 2015
    Messages:
    758
    Likes Received:
    550
    Location:
    usa
    chipper1, svk, Ronie and 1 other person like this.
  13. Armbru84

    Armbru84 Sucker for saws over 100cc

    Joined:
    Jul 12, 2016
    Messages:
    615
    Likes Received:
    1,591
    Location:
    Michigan
    Same here. Saw runs good!

    GLWS Tim!!
     
    chipper1 and cuinrearview like this.
  14. nighthunter

    nighthunter addicted to arboristsite

    Joined:
    Mar 5, 2016
    Messages:
    629
    Likes Received:
    2,261
    Location:
    ireland
    chipper1 likes this.
  15. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    I can get you a pair Oisin. $15 at Costco. Shipping might kill the deal though...
     
    chipper1, svk and nighthunter like this.
  16. Hinerman

    Hinerman Addicted to ArboristSite

    Joined:
    Jan 4, 2013
    Messages:
    3,561
    Likes Received:
    5,595
    Location:
    NE Oklahoma
    Which J-red is the 346 equivalent?
     
    chipper1 likes this.
  17. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    The last one is a red 346 NE
     
    chipper1 and Hinerman like this.
  18. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    Real nice weather moving in. If I hadn't been working all weekend I'd have been in the woods cutting. I would consider a clapped out 395xp to build in trade. So far only tire kickers on these.
     
    chipper1 likes this.
  19. VA 372xp

    VA 372xp ArboristSite Guru

    Joined:
    Nov 6, 2015
    Messages:
    771
    Likes Received:
    1,799
    Location:
    Richmond
    Saw runs 2 good a out box chain will make plenty of money with this saw
     
    chipper1 likes this.
  20. cuinrearview

    cuinrearview Red saw lover

    Joined:
    Oct 24, 2014
    Messages:
    6,681
    Likes Received:
    11,601
    Location:
    Hillsdale, MI
    Motivated to sell, listening to offers
     
    chipper1 likes this.

Share This Page