• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold 50cc madness

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cuinrearview

Red saw lover
Joined
Oct 24, 2014
Messages
10,212
Reaction score
19,613
Location
Hillsdale, MI
I realized I have far too many 50s right now. A couple of these I had planned on keeping around and playing with but the builder pile is growing and I've made a deal on a small cabin and land up north so the cash could come in handy. I will blow these off before shipping but I've been using them. I'll try and keep my descriptions a little more brief than usual. Feel free to ask questions. All prices are PHO, buyer pays shipping. I have some bars and chains that could be added for a small cost. Just let me know what you're looking for. The Sugi on the weed whip saw is NFS.

Husqvarna 350. OEM cylinder with the intake and exhaust widened. Lowers and bearing cup smoothed. .010 off of the top of the bearing cup surface. No base gasket. 185psi with a Hyway popup piston. Aftermarket muffler opened up. $185
20190926_190558.jpg 20190926_190540.jpg 20190926_190548.jpg 20190926_190531.jpg
 
The weed whip 346xp. I split the cases and added crank stuffers from a 545fx weedeater. New Nachi bearings, OEM seals, meteor piston and Caber ring. Carb re-built with Walbro kit. Cleaned up OEM NE cylinder. It's ugly(on purpose) but mechanically pretty much new. $300
20190926_190920.jpg 20190926_190925.jpg 20190926_190953.jpg 20190926_190933.jpg 20190926_190940.jpg
 
2152/3. Runs really well. Base gasket delete, timing advance, and muffler mod. New fuel line, meteor piston, carb kit. NE jug has most of the top fin missing and the second one welded. Very easy starting with the primer bulb. I plugged the decomp. I just finished building this, tuned and made a couple cuts last night. I have more pics of the build if anyone is interested. $350
20190925_194448.jpg 20190925_194455.jpg 20190925_194337.jpg 20190926_163437.jpg 20190925_194609.jpg 20190926_163451.jpg
 
Interesting build on the 346, Tim!

We would love to see a vid of your weed whip in action! :)

Bump for a Great seller
I did a build thread with vid over on the other site. It needs a sharp self feeding chain and a light hand to really shine. If I was more knowledgable on porting theory I think there's a way to make the stuffers work but a 346 is set up pretty well from the factory.
 
Real nice weather moving in. If I hadn't been working all weekend I'd have been in the woods cutting. I would consider a clapped out 395xp to build in trade. So far only tire kickers on these.
 

Latest posts

Back
Top