• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold 543xp

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tcirre

ArboristSite Lurker
Joined
Sep 30, 2020
Messages
31
Reaction score
13
Location
Illinois
Need help if possible! I have a Husqvarna 543xp with less than 20 tanks through it that completely bogs down when make a cut but idles and revs completely as it should with no issues. It has a new carb, plug, fuel lines and filters around. Comps at 115psi. No leaks on vacuum test. Aside from maybe the coil being shotty, which I’ve held off on replacing as I’m not sure if there is a good garage test, I’m at a complete loss. Any help is appreciated. TIA!
 

Attachments

  • IMG_2167.MOV
    36.5 MB
Back
Top