Sold Sold

[Overkill338]

............gone

 

[Overkill338]

@cuinrearview
@rumatt

These guys can vouch for me.

 

[cuinrearview]

I've used two of the 45mm pop up pistons in 350 builds. Everything measured out and the saws ran great. I assembled a cylinder and flat top piston kit on a 2152. The cylinder plating and ports looked very good for AM. I only got a small amount of run time on that because the tank seam leaked, but what I saw was VERY positive.

My experience with Ken and the Hyway bits that I've tried was positive. If I were on a budget I'd give any of them a shot.

 

[nighthunter]

Another bump for a great seller

 

[Big wood1]

Is the 261 kit 44.7 ?

 

[Overkill338]

Is the 261 kit 44.7 ?

Yes, it is.

 

[Overkill338]

I found an 036 kit also.

 

[Corncob]

They are just in the way, and I'm not going to use them any time soon.

Hyway
MS660 big bore
MS250
MS261 popup



Asking $45 Shipped (each!) to the lower 48. PM me if you need pics.

Thanks!!

ms 660 still available ?

 

[Overkill338]

ms 660 still available ?

Yes sir, send me a pm

 

[Allen miller]

They are just in the way, and I'm not going to use them any time soon.

Hyway
MS660 big bore
MS250
MS261 popup



Asking $55 Shipped (each!) to the lower 48. PM me if you need pics.

Thanks!!

I'm interested in 660

Sent from my SM-G930VL using Tapatalk

 

[chainsawman2011]

Pm sent


Sent from my iPhone using Tapatalk

 

[Overkill338]

My cousin brought back two kits he had got, so I have a 660 popup kit and a 372 popup kit.

 

[shortfuze82]

An you post pics of the 261 pop up kit if still avail

 

[Overkill338]

An you post pics of the 261 pop up kit if still avail

Yes sir

 

[Overkill338]

...and yes the 660 big bore is still available and so is the 660 popup, along with the 372 Big bore popup

 

[shortfuze82]

Could you do 45 shipped for the 261 kit?

 

[Overkill338]

Could you do 45 shipped for the 261 kit?

PM me please that way my post dont get cluttered up ya know?

 

[Overkill338]

Could you do 45 shipped for the 261 kit?

Check your PM!

 

[Overkill338]

Anyone need a &44mm 026 kit, I ordered the wrong damn size.

 

[Overkill338]

@cuinrearview Tim do you need a 353 kit ? Or a popup piston for a 036, 261, or 461 ?