Aussies, long T27 Torx bit found..

[tdi-rick]

For those Dolmar and Stihl boys that have had to make to do with saying 'click' as they wind on a T handle or made their own adapter, I've found an importer of T27 Torx x 150mm long drive bits.

These use a 1/4" hex drive, but that's an easy work around for your tension wrench and 1/4 drive ratchet.
We can't get the Wiha ones here that everyone uses in the US, the part #'s don't show in any catalogue this side of the Pacific, and none of the tool suppliers I use could find anything compatible, but at long last the penny dropped and I contacted the Witte importer.

Contact Sieper Australia and they'll let you know who the nearest distributor is.
The Witte pt. # is 29695, T27 X 150mm Torx bit

They have them in stock, reasonably priced and made in Germany.

 

[bennn*e]

or just goto your Stihl dealer...

1/4 dr 0812.542.2104 $41.80 - to suit torque wrench etc
1/4 hex 0812.540.1112 $23.39 - to suit cordless drill/screwdriver

 

[tdi-rick]

These are $13, but it's handy to know that Stihl carry them. I've never bothered to ask thanks to the rest of their pricing.

 

[MCW]

1/4 dr 0812.542.2104 $41.80 - to suit torque wrench etc
1/4 hex 0812.540.1112 $23.39 - to suit cordless drill/screwdriver

G'day mate. Being genuine Stihl parts you sure you didn't put your actual cost down without the 300% mark up?
Only kidding

 

[Jimbo209]

I just got the snap-on one for $14

ps: I know this is old