Br600 won’t open up and skips

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

vortec325

ArboristSite Operative
Joined
Nov 4, 2018
Messages
135
Reaction score
96
Location
Blue Hill
I got a br600 that’s thrown me for a loop . Was using it one day and it started bogging out and running terrible . Runs almost like it’s only firing every other time . Idles great (little high) but when you pull the trigger it revs up a little and starts shaking and missing . Went to the dealer and they said cam was bad and the timming cover was leaking, buy a new one . Well I bought the parts and did it myself . Same issue . Even switched out the coil ,carb and trigger handle wires . Adjusting the carb makes no difference at all . Am I looking at a lean condition


Sent from my iPhone using Tapatalk
 
the 4mix engines need a leak free crankcase breathing to run properly,
i tried to run one with the tappet cover removed, but it would,nt even start because of the inlet loop system that lubes the crank etc
 
the 4mix engines need a leak free crankcase breathing to run properly,
i tried to run one with the tappet cover removed, but it would,nt even start because of the inlet loop system that lubes the crank etc

I sealed it back up when I took everything apart


Sent from my iPhone using Tapatalk
 

Latest posts

Back
Top