Want to Sell Bunch of saws

[tickhound93]

Carpentry work has been super slow so its both left me short of cash, and also gave me a chance to go through the shelves of saws to sell. Due to the number of saws I'm going to list, I will not post pictures. If you are interested pm me with what you are interested in and I can send you pictures, videos and compression numbers. All saws are sold with one bar and chain. All prices do not include shipping. Thanks for looking!
Ms251cbez. Very clean saw, 18 inch bar. Ready to cut. 300
Ms250c, decent shape, new farmertec crank seals, new OEM fuel and impulse line. Has 025 case on it so nonflippy caps. 18 inch bar new stihl chain. Ready to cut. 125.
Ms211 good shape, not a ton of time on it, ready to cut, 18 inch bar. 150.
Husqvarna 575xp x torq. Decent shape, not a shelf queen, high rise filter cover. Farmertec piston and single ring. New crank bearings and seals. Dual spikes, 20 inch bar. Runs pretty good, not broke in yet. I eliminated crank stuffers. Has decomp. Somewhat of a project saw, tuning isn't dialed in 100 percent, needs one av mount, needs chain brake knee joint, would make good firewood saw. 300.
Poulan 2800, new fuel lines, runs pretty good. Decent shape. 16 inch bar. 75
Poulan 2150 x2. Good shape, new fuel lines, haven't run them in a while, 50 bucks each.
Stihl 041 non av, runs, decent shape. Haven't run it in a while, but ran when I put it in the shed. 20 inch bar, pretty new chain, sprocket nose is tweaked a little. 100
Homelite sxl red, metal filter cover, 20 inch bar. Runs but i haven't put much time on it. Decent shape. Manual and automatic oiler work. 50
Homelite super ez automatic, decent shape. Chain is shot. Was converted to electronic ignition. Runs, may need a little work, automatic oiler works, manual works too but not 100 percent. 50.

Some saws I am firm on the price, others I'm not. Pm me for more details. Thanks.

 

[USMC615]

PM sent.

 

[old 040]

Any pics of the 2800?

 

[tickhound93]

2800 pics

 

[tickhound93]

Ms250c is sold.

 

[tickhound93]

want to add that the 041 has oil leaking into the crank case, will try to resolve that issue. will go 60 plus shipping on the 2800, it runs fine but the oregon fuel line i used shrank a bit and fuel seeps at the tank where the fuel line and vent line exit. Thanks

 

[Vibes]

want to add that the 041 has oil leaking into the crank case, will try to resolve that issue. will go 60 plus shipping on the 2800, it runs fine but the oregon fuel line i used shrank a bit and fuel seeps at the tank where the fuel line and vent line exit. Thanks

That's only a problem when dropping a tree. I have 2 of these saws that have dribbled gas for years.

 

[tla100]

That's only a problem when dropping a tree. I have 2 of these saws that have dribbled gas for years.

I got a Super XL does the same thing...forget about it until you drop one.

 

[tickhound93]

2800 is gone. Gave it to a friend who needed a saw

 

[USMC615]

2800 is gone. Gave it to a friend who needed a saw

Good on you, young man for doing such. It'll come back to ya one day in spades. Guaranteed.

 

[tickhound93]

He's a blue collar boy raising 4 beautiful kids and supporting a stay at home wife. They scraped up some money to buy a new house, out in the country with some serious tree work needed, he stopped by today and looked at my collection of saws, and said "well when I can afford to buy a saw i will buy one from you" I fired the poulan up, shut it off and put it in the back of his truck. That's the way it should work, help a fellow working man out.

 

[USMC615]

He's a blue collar boy raising 4 beautiful kids and supporting a stay at home wife. They scraped up some money to buy a new house, out in the country with some serious tree work needed, he stopped by today and looked at my collection of saws, and said "well when I can afford to buy a saw i will buy one from you" I fired the poulan up, shut it off and put it in the back of his truck. That's the way it should work, help a fellow working man out.

There ya go...the good deed will come back to ya one day. That's the way to be a standup man.

 

[tickhound93]

Will go 250 plus shipping on the 251.
251, 211, sxl, sez, husqvarna and the 2150s still available.
Entertaining the thought of selling my 066, work forecast for February is pretty slow. Not 100% convinced to sell but if I can work out a deal I am happy with I may sell it. Thanks.

 

[Bill G]

I see you say carpentry work has been slow in NEIA. I have have two small roofing/soffit/facia jobs in SE IA jobs you can have. One is 1hr45min south of Dubuque and the other is 45 minutes south of that.

Bill

 

[Da83moon]

Sent you a pm on the sxl. Interested in it. It's it the 58 cc one? My great uncle had one and have been looking to.get one. If you have a pic you could post. I'll take it if it's what I'm looking for.

Sent from my E6782 using Tapatalk

 

[tickhound93]

I see you say carpentry work has been slow in NEIA. I have have two small roofing/soffit/facia jobs in SE IA jobs you can have. One is 1hr45min south of Dubuque and the other is 45 minutes south of that.

Bill

I really appreciate the offer bill, good to know others wanna help. Its not my crew to direct. I'm just the young guy who gets stuck setting walls and throwing rafters

 

[tickhound93]

Ms211 is sold. Just got off phone with the boss, not much work for the next 3 weeks. Will be posting my 066 shortly, as much as it sucks to do so.

 

[tickhound93]

Also have a pretty clean earthquake 38cc, will go 50 plus shipping on that one.

 

[A10egress]

Ms211 is sold. Just got off phone with the boss, not much work for the next 3 weeks. Will be posting my 066 shortly, as much as it sucks to do so.

Good luck, Hope things pick up for you!

 

[tickhound93]

Here is the sxl automatic. Had it running g for a while, bout 2,weeks ago, haven't messed with it since. Does have the metal air filter cover. 20 inch hardnose bar and chain are included. Everything works on this saw- auto oiler, manual oiler, even the throttle lock.