Can you swap a 404 pitch sprocket and chain on a c-71 to a 3/8

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
YES It turned out to be harder than I thought it would. You can do both ways if you do not mind waiting for what you need. Recently took a rollomatic bar and changed the sprocket end. to go to the 3/8. Some times the drive sprocket will not inner change. The easiest is to find a rim type clutch. Usually the there are two types of drive units that the rim fits onto. If you can find the larger clutch made for the larger rim which usually comes with a 404 rim then you will need a larger rim in 3/8 to put onto the 404 clutch. I believe you can find a 7 t that will go onto the 7 t 404 clutch. I changed some of my 3/8 to 404 so they would be all the same. It was difficult to find the right clutches for me. Thanks
 

Latest posts

Back
Top