Cannot locate oil adjustment screw on ms660

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mooch316

New Member
Joined
Sep 23, 2020
Messages
2
Reaction score
0
Location
Ontario
I have a ms660 and I'm unable to find the adjustment screw on the bottom of the base. I bought the saw used and am not sure if modifications were done to it. Any help would be greatly appreciated. Here is a picture.
 

Attachments

  • IMG_20200923_205027.jpg
    IMG_20200923_205027.jpg
    1.5 MB · Views: 23
Hmm, it should be on the left there follow those 2 ribs down into the dark shadowed area, I take it you have cleared and cleaned the area with some air to see if its hiding under oily saw dust and dirt ?

If not, its time to remove the clutch and cover that goes around the clutch drum and have a closer look under there.
Pretty Odd that its got an oil pump on that saw with no adjuster, didnt realise there was a pump without adjustment that would fit that saw.

Post some more pics, here is an IPL to help you along too.
 

Attachments

  • ms660_IPL.pdf
    1.8 MB · Views: 7
Back
Top