chain saw mills

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Old thread, but having both I recommend the granburg...
I started with a 48" ebay knockoff & ended up combining 2 separate kits into one.
I needed an extra middle "end bracket" & the second kit was to get the on feed bars and stiffness for my 42" & 51" bar on a 395.
Makes for much smoother finished cuts now. I was having chatter issues and had to do a lot of sanding before i stiffened it up.
I also have a granburg 36" I use with my 661, & 660 clones, on a 42", 32", and 24" bar. it comes with the needed pieces & performed perfectly out of the box.
After buying two knockoffs and modifying them into one to get what I wantedI ended up coming out ahead with just buying the granburg the second time.
The quality is certainly better with granburg, but I will say for 32" and under bars the Chinese is quite nice & performs well @ half the cost, or less
 
Back
Top