Chainsaws and Lifelong Friends Raffle

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The new complete prize list is:

1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @T.Roller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. 16" Doo9 bar donated by @Big1066ih (details/ pics to follow)

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @T.Roller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @T.Roller (pick up only)

34. 47 rounds of hard nose 357. Donated by @T.Roller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @tree monkey
 
Can a noob who's been lurking and only recently a "member" enter?

For sure you can, we just ask that you can be found when it comes time for the drawing. Please use an email that you monitor for Go Fund Me or even send @Jon1212 a PM with a number that he can text you at if your name is drawn.

Thank you for your donation.
 
The new complete prize list is:

1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @T.Roller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. 16" Doo9 bar donated by @Big1066ih (details/ pics to follow)

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @T.Roller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @T.Roller (pick up only)

34. 47 rounds of hard nose 357. Donated by @T.Roller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman
 
Seems like every time I update the list there is another donation. This time 3 added and an update to the bar on item 10.

0410181504.jpg 0410181504a.jpg





1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @T.Roller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @T.Roller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @T.Roller (pick up only)

34. 47 rounds of hard nose 357. Donated by @T.Roller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69
 
Seems like every time I update the list there is another donation. This time 3 added and an update to the bar on item 10.

View attachment 645914 View attachment 645915





1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @T.Roller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @T.Roller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @T.Roller (pick up only)

34. 47 rounds of hard nose 357. Donated by @T.Roller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69
Both the Zama carb and clutch are new, never used on prize #23.
 
A new day brings a new list of prizes. Two more added to the list overnight now up to 50 items on the list.

It is Thursday and payday for someone, let's ring that bell...

https://www.gofundme.com/chainsaws-and-lifelong-friendships


1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @T.Roller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @T.Roller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @T.Roller (pick up only)

34. 47 rounds of hard nose 357. Donated by @T.Roller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69

49. Survivor Homelite Super 2, the original owner is an older gentleman who cannot use the saw anymore. Put away running years ago probably just needs cleaning to have a runner here. Includes case and owners manual. Saw has strong compression and should be a fun vintage to add to a collection! Donated by @malk315

50. Three loops of 28" .404 .063 Carlton Chain. Donated by @Deets066
 
1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @T.Roller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @T.Roller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @T.Roller (pick up only)

34. 47 rounds of hard nose 357. Donated by @T.Roller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69

49. Survivor Homelite Super 2, the original owner is an older gentleman who cannot use the saw anymore. Put away running years ago probably just needs cleaning to have a runner here. Includes case and owners manual. Saw has strong compression and should be a fun vintage to add to a collection! Donated by @malk315

50. Three loops of 28" .404 .063 Carlton Chain. Donated by @Deets066

51. I’d like to offer 50 of my exhaust deflectors. Donated by @XP_Slinger (more details post #641)http://************/attachments/b2247b34-fdb1-41fd-a601-7a013d7a363c-jpeg.120588/

52. A personally crafted belt axe/knife combo.....stay tuned. Donated by @Scotty Overkill

53. I have a new Golf Piston for a Husqvarna 41 That I will donate. Donated by @tomdcoker

Thanks again to all that have donated prizes.

As Jerry Lewis use to say "Lets ring those phones..."
 
I'm challenged by technology from time to time. After I made four attempts at donating thru the listed site I finally got an address for my checkIMG_20180416_141705.jpg The first raffle I donated to was shortly after my mortgage was paid off. So that is what folks get from me. I actually got a choice in that raffle. A piece of equipment that I use most times that I saw. Glad editing my post so auto correct doesn't say something I didn't mean. I need find the other number for the zip:laughing:
Good day y'all
 

Latest posts

Back
Top