cuinrearview
Red saw lover
Maybe? Why don't you link the pages instead of screenshots? It will be easier for us to help. Or just decide what you want to do and someone can post a link for the parts you need?
Cs2150 Jubilee
- Thread starter giver
- Start date
Help Support Arborist Forum:
giver
ArboristSite Operative
cuinrearview
Red saw lover
42mm
giver
ArboristSite Operative
Its an OEM 42mm?
cuinrearview
Red saw lover
Pretty sure. I'm not up on Bailey's-speak but it appears to be.
The ad says it's OEM, "OEM cylinder assembly from Husqvarna"
It also says it's special order so you will have to wait on it.
giver
ArboristSite Operative
The other one with 2 rings says the same thing, I think I'll try and order the one you posted earlier first
giver
ArboristSite Operative
Maybe they put the wrong pic up. The one in the pic doesn't look like an OEM cylinder.
giver
ArboristSite Operative
I'll give them a call and find out
giver
ArboristSite Operative
Took the original cylinder off the 2150, looks like there could be a fair bit of potential in this cylinder. Transfers are really restricted
giver
ArboristSite Operative
Would need a flat top piston though
They run real good ported. I'm not a porter but was able to port this 350 with an aftermarket cylinder to run pretty good.
I used a 51 piston with a pop up in that one.
giver
ArboristSite Operative
Maybe I'll do some work on it just to compare to the 346 top end
Here's a stock one and one that has a 346 top end on it.
giver
ArboristSite Operative
Wow about 3 seconds faster I can only imagine what it will do ported
Tim has the first stock saw and I'm going to put the cylinder you have on the second one.
Similar threads
Latest posts
-
-
Please recommend a small chipper- Boxer x7 vs Vermeer bc700xl or....
- Latest: clydesdale6
-
-
-
-
-
