• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Dosko 510SD 6” Chipper

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MagArb

New Member
Joined
Mar 7, 2020
Messages
1
Reaction score
0
Location
Sierra Foothills
Chipper

2004 Dosko 510SD with SmartFeed.
Less than 1000hrs.

This is a great little chipper, and is easy to maneuver into tight spots with sharp knives it will chip up to 5.5” hardwood, and 6” soft wood, though it’s best suited for diameters up to 5”. The first owner pressure washed around the SmartFeed, which damages the LCD screen, so actual hours are not known. However, there are 3 characters on the hr meter, so the unit is under 1000 hrs. I have put around 200 hrs on it, so I’d guess it’s got approximately 600hrs.

The best thing about this chipper is the chip quality...it produces 1/2” mulch grade chips all day.

- No CARB issues - under 50hp.

- Kohler CH730S 23hp twin.

- 6” capacity.

- New feed roller shaft and coupler.

($350 repair). Less than 10hrs.

- New fuel pump less than 30hrs.

- I will include 4 sets of knives with plenty of life left, though they will need to be sharpened.

- Bed Knife (anvil) will need machining or replacement in the next 100hrs, but chips great as of now.

- Tires are in great condition.

- Smart feed LCD is not legible, but systems functions perfectly.

- Very well maintained. Always changed oil with Royal Purple at 20-30 hr intervals, and all bearings greased prior to use.

The chipper is located in Auburn, Ca. I would be willing to meet in the greater Sacramento area.



Asking $5700
 

Attachments

  • 0A1F4A91-60CC-4CA8-B571-11337A2A5DA7.jpeg
    0A1F4A91-60CC-4CA8-B571-11337A2A5DA7.jpeg
    2.2 MB · Views: 43
  • C55AD617-7732-40F5-91C7-A0A82781F469.jpeg
    C55AD617-7732-40F5-91C7-A0A82781F469.jpeg
    1.8 MB · Views: 33
  • E2361212-8489-4D61-A305-F9FE814CBECE.jpeg
    E2361212-8489-4D61-A305-F9FE814CBECE.jpeg
    1.2 MB · Views: 30
  • 8EBCDCD3-F8AD-48AE-AAB0-BB8477101EBE.jpeg
    8EBCDCD3-F8AD-48AE-AAB0-BB8477101EBE.jpeg
    1.3 MB · Views: 29
  • 2B3DC77C-EFC0-4457-942C-DB55E7CAAB17.jpeg
    2B3DC77C-EFC0-4457-942C-DB55E7CAAB17.jpeg
    949.3 KB · Views: 24
  • 891F32B8-310F-41B3-A2B4-2E10ED0D46B7.jpeg
    891F32B8-310F-41B3-A2B4-2E10ED0D46B7.jpeg
    1.2 MB · Views: 22
  • FE88BAE0-2263-4D66-B920-D5E088530397.jpeg
    FE88BAE0-2263-4D66-B920-D5E088530397.jpeg
    1.4 MB · Views: 20
  • B716F7B2-8A1F-450D-9A35-F8AD13A8EAAF.jpeg
    B716F7B2-8A1F-450D-9A35-F8AD13A8EAAF.jpeg
    1 MB · Views: 20
Chipper

2004 Dosko 510SD with SmartFeed.
Less than 1000hrs.

This is a great little chipper, and is easy to maneuver into tight spots with sharp knives it will chip up to 5.5” hardwood, and 6” soft wood, though it’s best suited for diameters up to 5”. The first owner pressure washed around the SmartFeed, which damages the LCD screen, so actual hours are not known. However, there are 3 characters on the hr meter, so the unit is under 1000 hrs. I have put around 200 hrs on it, so I’d guess it’s got approximately 600hrs.

The best thing about this chipper is the chip quality...it produces 1/2” mulch grade chips all day.

- No CARB issues - under 50hp.

- Kohler CH730S 23hp twin.

- 6” capacity.

- New feed roller shaft and coupler.

($350 repair). Less than 10hrs.

- New fuel pump less than 30hrs.

- I will include 4 sets of knives with plenty of life left, though they will need to be sharpened.

- Bed Knife (anvil) will need machining or replacement in the next 100hrs, but chips great as of now.

- Tires are in great condition.

- Smart feed LCD is not legible, but systems functions perfectly.

- Very well maintained. Always changed oil with Royal Purple at 20-30 hr intervals, and all bearings greased prior to use.

The chipper is located in Auburn, Ca. I would be willing to meet in the greater Sacramento area.



Asking $5700
Well,,,,, Did you ever sell it????
 
Back
Top