motolife313 ArboristSite Guru AS Supporting Member. Joined Mar 25, 2017 Messages 934 Reaction score 1,756 Location Portland OR Dec 23, 2018 #1 i wanna try a bear for my first try at carving. This Fir is about 27” diameter and been down over a year so little seasoned up I’m guessing
i wanna try a bear for my first try at carving. This Fir is about 27” diameter and been down over a year so little seasoned up I’m guessing
Chainmale ArboristSite Operative AS Supporting Member Joined Aug 6, 2017 Messages 169 Reaction score 177 Location Aotearoa Dec 23, 2018 #2 Really bad for needle sharp splinters, which could make it hard to carve also
T Ted Jenkins Firewood by TJ AS Supporting Member. Joined Apr 18, 2016 Messages 3,502 Reaction score 4,440 Location Twin Peaks Dec 23, 2018 #3 If that is what you have do it. I remember a guy using some fir here , but kept it damp until he was done. Thanks
If that is what you have do it. I remember a guy using some fir here , but kept it damp until he was done. Thanks
motolife313 ArboristSite Guru AS Supporting Member. Joined Mar 25, 2017 Messages 934 Reaction score 1,756 Location Portland OR Dec 23, 2018 #4 ok I’m going to go for it. Should I put boiled lin seed oil on it after torching it black?