ArboristSite.com Sponsors
 
 


Eager beaver carb job" beware, not repair friendly"

Discussion in 'Saw Building 101' started by stihldragon, Jun 9, 2019.

  1. stihldragon

    stihldragon ArboristSite Operative

    Joined:
    Dec 17, 2017
    Messages:
    108
    Likes Received:
    31
    Location:
    US
    As long as you put your bolts back in the designated holes abruptly as you teardown, it's not so bad. I wouldn't recommend throwing them in a bowl on this one. The first time I took this design on, I was green and I failed so I'm good to go now. Just handle with extra care because it's asinine as can be. Still a fantastic saw though. Any maintenance on it and you got yourself an entire rebuild.[​IMG]

    Sent from my Z557BL using Tapatalk
     
  2. stihldragon

    stihldragon ArboristSite Operative

    Joined:
    Dec 17, 2017
    Messages:
    108
    Likes Received:
    31
    Location:
    US
    Fun challenge for the saw mechanic!

    Sent from my Z557BL using Tapatalk
     
  3. stihldragon

    stihldragon ArboristSite Operative

    Joined:
    Dec 17, 2017
    Messages:
    108
    Likes Received:
    31
    Location:
    US
    Most importantly, be careful with the throttle linkage and pay very close attention to it's placement so you can put it back on correctly!

    Sent from my Z557BL using Tapatalk
     

Share This Page