ColdNorCal
ArboristSite Member
The cs352 filter lets debris into the carb. I tried putting some grease on the fitting as others have suggested but this did not help. I then tried filling the cavity area around the filter with thin foam filter material. This seemed to not help much either.
Today I added a strip of filter foam around the filter joint area and secured it with a zip tie. I also stuffed pieces of foam inside the H/L and Idle holes.
I called Echo customer service three times. First two times I waited several minutes then got hungup. Third call I waited then was forced to leave a voice mail. Lame!!
Any other suggestions, other then dont waste time calling Echo, are appreciated.
Today I added a strip of filter foam around the filter joint area and secured it with a zip tie. I also stuffed pieces of foam inside the H/L and Idle holes.
I called Echo customer service three times. First two times I waited several minutes then got hungup. Third call I waited then was forced to leave a voice mail. Lame!!
Any other suggestions, other then dont waste time calling Echo, are appreciated.