FarmerTec Huztl MS660 Updated Build Kit - Build Thread

[MG porting]

What is everyone's idling at mine seems to like 2750-2800? But mines ported so I know it's going to be a little picky just curious.

 

[MG porting]

Bedford T a little slobber on the saw will help keep the tree pitch from sticking to the case. Lol

 

[davhul]

I noticed half way through my oiler quit. It was the pump. Already had a oem worm.

 

[golddredgergold]

I noticed half way through my oiler quit. It was the pump. Already had a oem worm.

Bummer for sure. Get the HO pump from Ireland on ebay.

 

[Bedford T]

Bummer for sure. Get the HO pump from Ireland on ebay.

I sent him one. I keep extras of stuff, hate to wait. I found 3 660 oilers in my parts box yesterday. extras where I had replaced with HO plus an extra HO.

You guys see the tariff list. Chainsaw fell off but not bearings. Diesel tractors gonna hurt. We need a diesel 090

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[davhul]

Bummer for sure. Get the HO pump from Ireland on ebay.

It was. Out of 4 pumps 1 quit and bedford sent me another so I didn't have to wait. Thanks Bedford, Ireland sent me another no questions asked.
When I put the pump on I put the worm on before I tighten the screws to help center the pump.

 

[davhul]

What is everyone's idling at mine seems to like 2750-2800? But mines ported so I know it's going to be a little picky just curious.

I like around 2800. With the stiff huztl springs the chain won't creep til over 3500 I think.

 

[ammoaddict]

I think mine is around 2800, I will have to check it again.

Sent from my Moto G (4) using Tapatalk

 

[Bedford T]

It was. Out of 4 pumps 1 quit and bedford sent me another so I didn't have to wait. Thanks Bedford, Ireland sent me another no questions asked.
When I put the pump on I put the worm on before I tighten the screws to help center the pump.

I got a worm and a new rim kit coming. I gotta remember to do put the worm on first that's a smart move.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[ammoaddict]

What is everyone's idling at mine seems to like 2750-2800? But mines ported so I know it's going to be a little picky just curious.

I checked it again today. It jumps around from 2400 to 2800. It's not steady. I turned it to 12,500.

Sent from my Moto G (4) using Tapatalk

 

[golddredgergold]

Picked up my new worm gear yesterday. $17.49+ tax. And they actually had it in stock! Bloomin miracle.

 

[golddredgergold]

Any of you guys have a picture of this plate mounted on the saw so I can see the bottom and how it bolts on? I know it bolts to the handlebar mount. Just would like a nice straight on picture of it if you could please.

 

[Bedford T]

Any of you guys have a picture of this plate mounted on the saw so I can see the bottom and how it bolts on? I know it bolts to the handlebar mount. Just would like a nice straight on picture of it if you could please.View attachment 658135

That plate covers the bottom. That's not what Stihl sells. I will show you that one and maybe it will help.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Bedford T]

This is on my 660

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Canyon Angler]

I've seen that part, but I don't understand what it's supposed to do. Protect the handle if it throws a chain?

It ain't gonna protect the tank that I can see...

 

[Bedford T]

I've seen that part, but I don't understand what it's supposed to do. Protect the handle if it throws a chain?

It ain't gonna protect the tank that I can see...

It covers the part the chain wacks. It would damage the area right outside. It has a lip that covers the edge.

I bet they put some thought into it based on warranty claims from folks ******** and whining

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[ammoaddict]

Who all has had leaking fuel caps and what's the best fix? Mine leaks badly sometimes and sometime not at all. It's the solid black one. I've tried very hand tight, screw driver tight, doesn't seem to matter. It almost like it a little too big and you have to find the perfect sweet spot for it not to leak.

Sent from my Moto G (4) using Tapatalk

 

[Bedford T]

Who all has had leaking fuel caps and what's the best fix? Mine leaks badly sometimes and sometime not at all. It's the solid black one. I've tried very hand tight, screw driver tight, doesn't seem to matter. It almost like it a little too big and you have to find the perfect sweet spot for it not to leak.

Sent from my Moto G (4) using Tapatalk

OEM, oem, oem cap

A little chant.

It's likely the seal, if you replace the seal it may not work cause it's not flat

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Bedford T]

Have you guys seen complaints of fuel spraying when you unseal the fuel cap. [emoji91] fighters worried. I use av100 and don't have that problem could it be the gas mixture or am I just lucky.

(With a oem vent)

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[ammoaddict]

OEM, oem, oem cap

A little chant.

It's likely the seal, if you replace the seal it may not work cause it's not flat

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

I will get an oem if that will fix it.

Sent from my Moto G (4) using Tapatalk