Figured i could share my score last night with d

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jkstihl

Chainsaws make me fap.
Joined
Jun 15, 2017
Messages
1,244
Reaction score
1,335
Location
Alabama
Bought last night for 40$ runs but wont rev, ordered a carb kit, and a chinese carb for the hell of it, fuel and impulse lines, intake boot. Anything else yall would recommend replacing?
 

Attachments

  • 20191211_005558.jpg
    20191211_005558.jpg
    3.8 MB · Views: 138
  • 20191210_204739_HDR.jpg
    20191210_204739_HDR.jpg
    4.6 MB · Views: 138
  • Screenshot_2019-12-10-18-36-51.png
    Screenshot_2019-12-10-18-36-51.png
    2 MB · Views: 129
Haha thanks yall...nearly nutted my pants as soon as it was in my possession. Its a early model d chamber 137 s/n
 
Yall aint gotta be too jelly, there is a slot on intake side of piston from the bottom to about half inch below the rings, appears someone stuck a screwdriver thru the carb and used it as a piston stop
 

Attachments

  • 20191211_233228.jpg
    20191211_233228.jpg
    1.2 MB · Views: 48
Something could have come loose inside and done that too. Time to tear it down. $40 for a project 046 is still a great deal. If you don't want to mess with it drop me a PM. I can make you some money on it.
 
Yeah ive heard its probably gonna be big end bearing on crank that came apart, so ill need a crank also. And cuinrearview ill let you know what i decide, going to tear it down and see whats going on in the next couple of days. Had to order long shank t27 so waiting on that.
 
Yeah ive heard its probably gonna be big end bearing on crank that came apart, so ill need a crank also. And cuinrearview ill let you know what i decide, going to tear it down and see whats going on in the next couple of days. Had to order long shank t27 so waiting on that.
I and a lot of guys on here would jump on that saw if u wanted to make some money. Just sayin
 

Latest posts

Back
Top