fixing maul

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I think I'd cut some hardwood wedge pieces to drive into the void. Probably will require a good adhesive too. Any fix will be temporary, as the forces involved in splitting are considerable.

The epoxy suggestion above is probably best otherwise.
 
Replace it with a nice wood handle. Watch some Buckin' Billy Ray video on youtube. Maybe get inspired to put a handle on yourself. Such a good feeling fitting a nice wood handle, burning it, Wotco Danish oil on it, burn it again & rough sand with 80 grit, little more oil - what a look!
 

Latest posts

Back
Top