NLFS
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Sold NLFS
- Thread starter Woodslasher
- Start date
Help Support Arborist Forum:
Bump
Bump
Hang on to your bar Dan, it will either be .050 or .058 gauge and will work with any pitch chain you want to put on another 10 Series saw.
I have at least a lifetime supply of .354 chain and drums even after setting up half of the 10 Series saws in the display with .354 chain.
Mark
I have at least a lifetime supply of .354 chain and drums even after setting up half of the 10 Series saws in the display with .354 chain.
Mark
How does it cut Mark is it nice to use? I feel it might suit the 54s real nicely
All of the .354 that I have seen is chipper /semi-chisel and the cutters are a bit smaller than full size 3/8 chain, the chassis is the same height as most .404. It is not particularly fast or long lived from the limited exposure I've had.
Mark
Mark
Ahh right. Was thinking it might be just a nice medium between .325 and 3/8
