CJH
ArboristSite Member
Found a Stihl cylinder in an abandoned engine test lab at work. Cylinder is in decent shape, a bit of transfer, piston is a bit rough, one ring stuck in groove and broke. A quick search on the 1119 part number shows 038, MS380 50 mm cylinder (50 mm confirmed with calipers)
It certainly was used to cut wood, but don't know if it was on test, or a home project someone brought in. Sitting next to a relatively new looking 8 cylinder Caterpillar diesel engine, been sitting there for years. Building is slated to be torn down, I'll try to get the diesel, would make my little Honda 4 cylinder run a bit stronger!
Free for the cost of shipping if someone can use it. Otherwise to the metal scrap bin.
It certainly was used to cut wood, but don't know if it was on test, or a home project someone brought in. Sitting next to a relatively new looking 8 cylinder Caterpillar diesel engine, been sitting there for years. Building is slated to be torn down, I'll try to get the diesel, would make my little Honda 4 cylinder run a bit stronger!
Free for the cost of shipping if someone can use it. Otherwise to the metal scrap bin.