FS 66 trimmer head PN

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

miller755

ArboristSite Operative
Joined
Jan 29, 2020
Messages
142
Reaction score
148
Location
46350
Wondering if anyone can match the pic of this shaft to the correct trimmer head, I ordered one that was supposed to fit and it did not.
The trimmer is probably from the 1990's, but it is still a decent tool except the head is worn out.
Trying to get it up and running as a backup.
Thanks.
 

Attachments

  • 15922730480384705348172699010452.jpg
    15922730480384705348172699010452.jpg
    1.7 MB · Views: 17
Which one did you buy, that does not fit? The silver collar screw in your picture should be removeable (screwable left hand thread), I think. A AutoCut 25-2, 30-2 and a TrimCut 30-2 I found listed for the FS 66. You will also need one or two guard washers I think to fit on the gearhead.

More specific information about the trimmer would be good to know too.
 
Sorry, thought I put up a reply to my question already, i figured out that it was an adapter for a universal trimmer head about 15 minutes after asking the question. The adapter had been on there for at least 15 yrs. Got the Oem sytle stihl trimmer head on, happy to have the FS66 up and running. Also made a new filter from Uni dual density foam. Thanks for the replies.
 
Back
Top