Full wrap handlebar for McCulloch Pro Mac's (10-10 or 700)

[Rich Ray]

BTR - check your inbox.

Mark

Mark,
Do you still have any available for LH start?

 

[heimannm]

Ray - check your inbox and remember that you will have to modify the clutch cover on the 700 to clear the handle.

Mark

 

[Jay16923]

Ever get these for sale I'd be intrested in a couple

 

[heimannm]

I have several left, keep in mind that you have to modify the later model clutch cover to fit. Look back through the thread for details.

Mark

 

[Rich Ray]

I have several left, keep in mind that you have to modify the later model clutch cover to fit. Look back through the thread for details.

Mark

I would like 3.

 

[Rich Ray]

Ray - check your inbox and remember that you will have to modify the clutch cover on the 700 to clear the handle.

Mark

There was nothing in my inbox.

 

[heimannm]

Ray- Forgot to send it, check again.

Mark

 

[Baitchucker]

Ray- Forgot to send it, check again.

Mark

Hey Mark, just came across your handle bars, have any left. How do I get a pair.

 

[shawnf77]

Ray- Forgot to send it, check again.

Mark

Wanted to see if there are any handles left? Would love 1 or 2.

 

[Scottyd]

Just today...good news is they made some prototypes to check out. On the plus side, while they don't exactly match the original shape, they look very much like the full wrap on the SP80/81 type saws. On the negative side, they only really match up correctly with the RH start machines since that is what the original came from.

View attachment 589491

On the 4-10

View attachment 589492

View attachment 589493

View attachment 589494

It will also fit an LH start saw if you have the oldest version of the clutch cover, shown on the right.

View attachment 589495

But it is a tight fit on the starter and under the clutch cover.

View attachment 589496

View attachment 589497

These would be $50 to $75 depending on how many we can get lined up and order at a time, 15+ will get them for $50 each.

Mark

Are the full wrap handle availible for a 10-10? Thanks

 

[heimannm]

I have two versions available, one for RH start saws and one for LH start saws. On LH start saws the clutch cover will need to be modified to clear the full wrap bar.

Mark

 

[shawnf77]

I have two versions available, one for RH start saws and one for LH start saws. On LH start saws the clutch cover will need to be modified to clear the full wrap bar.

Mark

Would love to buy the LH start one.

 

[heimannm]

I still have several available, I will send a "conversation" with more details.

Mark

 

[Ryan 10-10]

Mark,
Do you still have the full wrap for a left hand pull start Pro Mac 10-10 from around 1977-1978? If you do, is there a conversion modification process?

 

[heimannm]

I do have several available yet. If your saw has the older type of short clutch cover, no modifications are needed.



If your saw has the long clutch cover it requires only a little filing to clear the lower frame.



If your saw has the later version of the short clutch cover, more extensive modification will be required.







Mark

 

[Ryan 10-10]

I would like to buy one. How much are they and how do I get you the money? See the picture of my saw that is attached. Will they fit on if I keep the chain brake clutch on? Or will I need to remove it.

 

[heimannm]

The chain brake can stay as it is, you just use a little different procedure to get the cover off and on again.









Check your mailbox (the letter icon in the top right corner) for your other answers.

Mark

 

[Ryan 10-10]

Great...thank you so much. You are all set.

 

[Toychainsaw]

I’m in the same boat as Ryan if you still have them for sale

 

[Scottyd]

The chain brake can stay as it is, you just use a little different procedure to get the cover off and on again.

View attachment 858697

View attachment 858698

View attachment 858699

View attachment 858700

Check your mailbox (the letter icon in the top right corner) for your other answers.

Mark

Price and avail? Thanks