• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Garage cleanout - Bars, chains,clutch cover, handle, etc...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tacomatrd98

ArboristSite Guru
Joined
Jan 17, 2008
Messages
675
Reaction score
1,033
Location
Newville, PA
I have a few more bars and a bunch more chains that I no longer have need for. I'm going to try to sell the chains grouped by sizes. If they don't move that way or the lot is too big, I may decide to split them up then. Prices include shipping to lower 48. Paypal as a gift or add 3% If you think it's too much, make me an offer, worst I can say is no.

Any other pics needed just ask.

-AJ

BAR/CHAIN Combos

1. 18" Husky "B" Mount - Husky labeled Oregon PM 3/8 .058 68dl Used, looks rougher than it is. Comes with 1 brand new Husky chain and one used but sharp Stihl chain. $50 shipped bar/2 chains SOLD

2. 24" Husky "B" Mount - Husky labeled Oregon PM - 3/8 .058 84dl used, in good shape. comes with 4 used chains, all sharpened, not by me so IDK how they cut. $80 shipped bar/4chains.


*Got this stuff (1 and 2 above) as part of a deal, I have never ran them but visually everything looks ok.*

3. Cannon SuperMini - 20" 3/8 .050 3003 Stihl mount comes with 3 loops of 63PS Stihl chain. Great bar for a 024/026, 260, 261 etc. very little wear p/n CSM-S1-20-50 $115 SOLD

4. STIHL Rollomatic E - 16" .325 .063 62dl Small mount New with 1 loop of 26RS p/n 3005-000-4713 $40 SOLD

BARS

1. GB Arbor Pro - 16" .325 .050 64dl Solid bar, repl tip. Not sure of the actual mount but can be modified to fit stihl small mount 3005 series saws. You have to drill the oil hole and cut the tail a little. I have another one that I use on a 241cm. p/n P016-50MH. $35

2. STIHL 16" 3003 Mount PICCO bar - NOS, I believe these are nla, it is as new. has maybe 10 min run time. This will work on any 3003 mount but was designed for 024/026. This bar with an 8tPicco rim is a cool setup on these little saws. $50 shipped SOLD

3. Stihl 14" 3005 Mount PMMN .043 50dl bar - Bar is in excellent shape. it came on my 200t when I bought it new in 08. The writing wore off about the 3rd time I used it. rails are good, sprocket is good. $15

CHAINS


1. 18" 3/8 .050 68dl Oregon 72LGX - Four (4) of these, all really good, just wood dull $50 shipped SOLD

2. 18" 3/8 .050 66dl Stihl 33RS - Three (3) of these, 1 dull, 2 sharp (one has aggressive rakers) - $35 shipped SOLD

3. 18" 3/8 LP .050 61dl Stihl 63PS - Looks like hit a rock first time out, needs ground. $9 shipped

4. 20" 3/8 .050 72dl - Ten (10) Stihl 33RS (2 dull, 2 "ok", 6 sharp(2 on last sharpen) 1 Oregon 72LGX, 1 33RSC3 Stihl chain I will throw in to get rid of. $110 shipped for all SOLD

5. 25" 3/8 .050 84dl Stihl 33RS - Six (6) of these, all sharp ready to go, good chains - $75 shipped SOLD

6. 25" 3/8 .050 84dl Stihl 33RSF - Four (4) of these, 2 sharp, 2 dull, all good shape - $40 shipped SOLD

7. 28" 3/8 .050 91dl - 1 Stihl 33RSC, 1 Stihl 33RSLHK, 1 Stihl 33RSF. All need sharpened but in great shape - $27 shipped SOLD

8. Three Stihl 36RSC-91dl .375 pitch .063g. Fits 28" .063 bars ALL NEW $50 all 3 SOLD

9. Three Used 20" chains - 3/8 .050 70dl - small mount husky 20" stuff would use these. all 3 need sharpened but are better than half life. $18

10. One 14" 3/8LP .050 -50dl carlton. better than half life. $8

OTHER STUFF

- 372xp XT handlebar - Straight, no bends/kinks - $30 shipped

- 372XP clutch cover - UGLY, ha a crack/chip on the rear slanted portion - $10? shipped SOLD

- Chopper 1 Axe - Amazingly I have not sold this yet $30 shipped (Axes are spensive to ship and undoubtedly somebody from PNW will want it) SOLD

-Pro Safety Felling spikes / dogs / dawgs - New, will fit Stihl 044/440, 064, 066/660 etc. Not for 046/MS460. they will bolt on just fine but the outer spikes will be 1/4" too short. Have 1 set, $30 shipped

-Oregon Bar mounted chain grinder - NEW. What you see is what you get. I have never used it.
Asking $100 Come on guys...Super deal here!


DSC02912.JPG DSC02913.JPG DSC02919.JPG DSC02917.JPG
 
I'm interested in the axe. Is it a 5lb head?
 
I have a few more bars and a bunch more chains that I no longer have need for. I'm going to try to sell the chains grouped by sizes. If they don't move that way or the lot is too big, I may decide to split them up then. Prices include shipping to lower 48. Paypal as a gift or add 3% If you think it's too much, make me an offer, worst I can say is no.

Any other pics needed just ask.

-AJ

BAR/CHAIN Combos

1. 18" Husky "B" Mount - Husky labeled Oregon PM 3/8 .058 68dl Used, looks rougher than it is. Comes with 1 brand new Husky chain and one used but sharp Stihl chain. $50 shipped bar/2 chains

2. 24" Husky "B" Mount - Husky labeled Oregon PM - 3/8 .058 84dl used, in good shape. comes with 4 used chains, all sharpened, not by me so IDK how they cut. $80 shipped bar/4chains.


*Got this stuff (1 and 2 above) as part of a deal, I have never ran them but visually everything looks ok.*

3. Cannon SuperMini - 20" 3/8 .050 3003 Stihl mount comes with 3 loops of 63PS Stihl chain. Great bar for a 024/026, 260, 261 etc. very little wear p/n CSM-S1-20-50 $115 SOLD

4. STIHL Rollomatic E - 16" .325 .063 62dl Small mount New with 1 loop of 26RS p/n 3005-000-4713 $40 SOLD

BARS

1. GB Arbor Pro - 16" .325 .050 64dl Solid bar, repl tip. Not sure of the actual mount but can be modified to fit stihl small mount 3005 series saws. You have to drill the oil hole and cut the tail a little. I have another one that I use on a 241cm. p/n P016-50MH. $35

2. STIHL 16" 3003 Mount PICCO bar - NOS, I believe these are nla, it is as new. has maybe 10 min run time. This will work on any 3003 mount but was designed for 024/026. This bar with an 8tPicco rim is a cool setup on these little saws. $50 shipped SOLD

3. Stihl 14" 3005 Mount PMMN .043 50dl bar - Bar is in excellent shape. it came on my 200t when I bought it new in 08. The writing wore off about the 3rd time I used it. rails are good, sprocket is good. $15

CHAINS


1. 18" 3/8 .050 68dl Oregon 72LGX - Four (4) of these, all really good, just wood dull $50 shipped SOLD

2. 18" 3/8 .050 66dl Stihl 33RS - Three (3) of these, 1 dull, 2 sharp (one has aggressive rakers) - $35 shipped SOLD

3. 18" 3/8 LP .050 61dl Stihl 63PS - Looks like hit a rock first time out, needs ground. $9 shipped

4. 20" 3/8 .050 72dl - Ten (10) Stihl 33RS (2 dull, 2 "ok", 6 sharp(2 on last sharpen) 1 Oregon 72LGX, 1 33RSC3 Stihl chain I will throw in to get rid of. $110 shipped for all SOLD

5. 25" 3/8 .050 84dl Stihl 33RS - Six (6) of these, all sharp ready to go, good chains - $75 shipped SOLD

6. 25" 3/8 .050 84dl Stihl 33RSF - Four (4) of these, 2 sharp, 2 dull, all good shape - $40 shipped

7. 28" 3/8 .050 91dl - 1 Stihl 33RSC, 1 Stihl 33RSLHK, 1 Stihl 33RSF. All need sharpened but in great shape - $27 shipped SOLD

8. Three Stihl 36RSC-91dl .375 pitch .063g. Fits 28" .063 bars ALL NEW $50 all 3 SOLD

9. Three Used 20" chains - 3/8 .050 70dl - small mount husky 20" stuff would use these. all 3 need sharpened but are better than half life. $18

10. One 14" 3/8LP .050 -50dl carlton. better than half life. $8

OTHER STUFF

- 372xp XT handlebar - Straight, no bends/kinks - $30 shipped

- 372XP clutch cover - UGLY, ha a crack/chip on the rear slanted portion - $10? shipped SOLD

- Chopper 1 Axe - Amazingly I have not sold this yet $30 shipped (Axes are spensive to ship and undoubtedly somebody from PNW will want it) SOLD

-Pro Safety Felling spikes / dogs / dawgs - New, will fit Stihl 044/440, 064, 066/660 etc. Not for 046/MS460. they will bolt on just fine but the outer spikes will be 1/4" too short. Have 1 set, $30 shipped

-Oregon Bar mounted chain grinder - NEW. What you see is what you get. I have never used it.
Asking $100 Come on guys...Super deal here!


View attachment 380565 View attachment 380566 View attachment 380568 View attachment 380569
UPDATE items in bold are still available
 
A husky "A" mount would be small(346/550/555/etc), "B" would be large mount (562/372/390/etc) On the tail of the oem husky bars it says a or b for mount type.
 
Got my stuff today. AJ still has more to sell. Great seller to deal with.
 

Latest posts

Back
Top