baumgrenze
ArboristSite Lurker
I inherited several 14" pole saw blades from a 'Scotch' neighbor we all called 'Mac.' I won't be able to use all of them and would like to post them on craigslist. I tried an image search on Google and never found this hole pattern. I'd like to describe them accurately.
All of them are devilishly sharp. Mac was a retired line engineer and he liked to use his hands.
Does anyone know who made these blades? I measured the holes with a dial caliper that once belonged to Mac. I put my best guess as to bolt sizes on the closeup image. (FWIW - in words a #10 bolt (0.193",) a #20 (0.323") bolt closer to the butt end, and then an oval to fit a #10 bolt, but twice as long as it is wide.)
IMG http://imgur.com/a/0Lj47
I hope this worked. The URL for the image looks 'strange' to me.
I'm open to 'help' if it did not work
thanks
baumgrenze
All of them are devilishly sharp. Mac was a retired line engineer and he liked to use his hands.
Does anyone know who made these blades? I measured the holes with a dial caliper that once belonged to Mac. I put my best guess as to bolt sizes on the closeup image. (FWIW - in words a #10 bolt (0.193",) a #20 (0.323") bolt closer to the butt end, and then an oval to fit a #10 bolt, but twice as long as it is wide.)
IMG http://imgur.com/a/0Lj47
I hope this worked. The URL for the image looks 'strange' to me.
I'm open to 'help' if it did not work
thanks
baumgrenze