Homelite 330/360 worth 100 bucks?

[Woodslasher]

@RED-85-Z51 do you recall the sizes and approx lengths of the fuel hoses for these saws by any chance?

 

[RED-85-Z51]

@RED-85-Z51 do you recall the sizes and approx lengths of the fuel hoses for these saws by any chance?

Unfortunately i don't, i have a box of all different inner and outer diameter combinations of lines of various materials and i just pick one that works best. Its a pain to get the case in half, tank out, and front bulkhead out the first time. All my hoses were intact under the bulkhead so i just copied what was there except 1 hose that was a bit unique in shape, i left it be

Sent from my SM-G996U using Tapatalk

 

[RED-85-Z51]

Some pics of the process

Sent from my SM-G996U using Tapatalk

 

[Jasonrkba]

The 330 filters have gotten pricey.

 

[furb]

I had 5 or 6 nice 330s. The only way I could sell them was $10 each in a pile with other saws. It may be a regional thing. 360 has more value. I liked them to rob ignition transformers from for bigger saws.

 

[Jasonrkba]

The intake boots seem like the biggest weakness. They will eventually turn to goo. The oil pump on the 330 can be problematic. Other than that, good beaters kinda like the mac 600's. Not the first saws I grab but they will get the job done.

 

[RED-85-Z51]

The intake boots seem like the biggest weakness. They will eventually turn to goo. The oil pump on the 330 can be problematic. Other than that, good beaters kinda like the mac 600's. Not the first saws I grab but they will get the job done.

Calling that thing an oil pump is giving it a bit too much credit

Sent from my SM-G996U using Tapatalk

 

[joe25DA]

I had 5 or 6 nice 330s. The only way I could sell them was $10 each in a pile with other saws. It may be a regional thing. 360 has more value. I liked them to rob ignition transformers from for bigger saws.

Yeah that module fits the 750. I used one