ArboristSite.com Sponsors
 
 


SOLD!!!! Homelite 360 professional

Discussion in 'Chainsaws' started by DisturbeD, Oct 12, 2019.

  1. DisturbeD

    DisturbeD ArboristSite Lurker

    Joined:
    Sep 2, 2019
    Messages:
    40
    Likes Received:
    28
    Location:
    United states
    20191012_202557.jpg Here is a really nice homelite 360 professional. Have not tried to start this saw as of yet might tomorrow. Has spark and 140psi. Really nice vintage collectable saw. I'm asking $250 shipped in the states. PayPal gns works and I generally ship saw FedEx.

    Update in this saw. Got to work on the saw today. It started right up after a couple pulls and ran and idled as it should. So I'd say the carb boot and fuel line or lines on this saw are good or had already been replaced before I got the saw.

    20191012_202608.jpg 20191012_202611.jpg 20191012_202627.jpg 20191012_202630.jpg
     

    Attached Files:

  2. grizz55chev

    grizz55chev Tree Freak

    Joined:
    Dec 9, 2010
    Messages:
    12,001
    Likes Received:
    23,413
    Location:
    northern calif., around auburn
    If it’s been sitting, the carb boot and fuel lines need replaced, but it looks like a low hr saw.
     
  3. DisturbeD

    DisturbeD ArboristSite Lurker

    Joined:
    Sep 2, 2019
    Messages:
    40
    Likes Received:
    28
    Location:
    United states
    It might have been sitting for a short the guy used it every once in awhile. The guy drained the gas and oil before letting it sit. I did read the article on here about the carb boot and gas lines though. How would one know if the boot is bad?
     
  4. grizz55chev

    grizz55chev Tree Freak

    Joined:
    Dec 9, 2010
    Messages:
    12,001
    Likes Received:
    23,413
    Location:
    northern calif., around auburn
    How it runs would be a clue, hard starting, high idle , unable to tune are all symptoms.
     
  5. DisturbeD

    DisturbeD ArboristSite Lurker

    Joined:
    Sep 2, 2019
    Messages:
    40
    Likes Received:
    28
    Location:
    United states
    Well that makes sense. Haven't tried to start it yet I'm sure I will tomorrow along with a few other saws.
     
    grizz55chev likes this.
  6. grizz55chev

    grizz55chev Tree Freak

    Joined:
    Dec 9, 2010
    Messages:
    12,001
    Likes Received:
    23,413
    Location:
    northern calif., around auburn
    The boot is still available, last time I looked, not too expensive either as I remember.
     
    DisturbeD likes this.
  7. DisturbeD

    DisturbeD ArboristSite Lurker

    Joined:
    Sep 2, 2019
    Messages:
    40
    Likes Received:
    28
    Location:
    United states
    Well got to get this saw running today. Started right up and idles as it should. The carb boot and fuel line or lines in this saw are good or have already been replaced.
     
    grizz55chev likes this.
  8. grizz55chev

    grizz55chev Tree Freak

    Joined:
    Dec 9, 2010
    Messages:
    12,001
    Likes Received:
    23,413
    Location:
    northern calif., around auburn
    A good running saw should be easy to sell.
     
    DisturbeD likes this.

Share This Page