Homesite xl auto oiling

[redunshee]

I’m embarrassed to say I’ve tried several times to install the throttle linkage between the carb and throttle handle with no success. Anyone have a trick or method that works. Photo attached.

 

[1hp]

got hemostats?

 

[RED-85-Z51]

Put the handle back together...

Put the linkage on the carb.

Slide the engine into the housing until the linkage touches the trigger.

Squeeze the trigger fully and the linkage pivots into its place...and slide the engine in.

Sent from my LM-G820 using Tapatalk

 

[redunshee]

got hemostats?

Yea, but that didn't work

 

[redunshee]

Put the handle back together...

Put the linkage on the carb.

Slide the engine into the housing until the linkage touches the trigger.

Squeeze the trigger fully and the linkage pivots into its place...and slide the engine in.

Sent from my LM-G820 using Tapatalk

will try. installed a LO and HI needles carb which started this whole issue. Thanks

 

[redunshee]

that did the trick