Husky 435 erratic idle

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ok, so here's where I'm at with the blasted thing. Fuel line holds pressure. Fuel tank vent is working correctly under both vacuum and pressure. I attempted a pop off test, and it wouldn't pop at 15PSI. Is that where the issue lay?
 
I can't find any info on meter lever height on the Zama C1t, but assume it should be flush to the case. Granted, with no being able to get it to pop off @ 15PSI, maybe it needs to stand proud of the case?
 
I'm at a loss at this point. I think my next move is to pull the coil off my 445 and see if its an ignition issue. Thoughts?
 
Back
Top