ArboristSite.com Sponsors
 
 


Husky coil interchange

Discussion in 'Chainsaw' started by Brent Adams, May 12, 2019.

  1. Brent Adams

    Brent Adams ArboristSite Member

    Joined:
    Jan 4, 2019
    Messages:
    70
    Likes Received:
    60
    Location:
    Albertson GA
    Have a 350 with a supposed bad coil. Havent tested it, as the saw needs a little compression help, but assuming the owner goes for the plan of swapping in a 353 Meteor piston kit, the coil could be the next issue. I have access to a couple of 55s that are in pieces with destroyed p&c. All seem to have coils intact. They seem similar, though I havent measured. Does anyone know if the 55 coil will work on the 350?
     
  2. Andyshine77

    Andyshine77 Addicted to ArboristSite

    Joined:
    Jan 25, 2004
    Messages:
    9,650
    Likes Received:
    6,674
    Location:
    Cincinnati, OH
    A 55 coil will not work. However any black coil from a 350, 351, 353, 346, 359, 357, 365, 372, 385, 390 among other will work. A blue coil from a 346xp will work too, but a blue coil from say a 390xp would have a revlimiter set too low for a 350.
     
    kevin j and brad ruch like this.

Share This Page