• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell husky cylinder and piston set

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ghitch75

ArboristSite Guru
Joined
Aug 4, 2004
Messages
594
Reaction score
35
Location
bloomfeild in
brand new never installed.....will fit 262,268 and 272......$50.00 shipped....can take PP,MO or CHECK(will have to clear before ship)
 

Attachments

  • S3010832.JPG
    S3010832.JPG
    54.4 KB · Views: 40
yes it's after market......it will fit a 272 as that is what i bought it for......place i got it from said it would fit the others???
 
point is that the cylinder in question would fit a 162. neal might have been confusing the 162 with 261.
 
It would take some work for sure. You can't fit the stock 162 top cover over the 272 cylinder because the cooling fins on top get in the way. You have to Dremel off some plastic.

i thought the 272 cylinder was visually identical to the 268. i put a 268 cylinder on a 162 once. didn't have to do any trimming either. maybe that 162 i had was already trimmed.
 
i thought the 272 cylinder was visually identical to the 268. i put a 268 cylinder on a 162 once. didn't have to do any trimming either. maybe that 162 i had was already trimmed.
It depends on whether or not your 162 has the 266 style cover or the regular stock 162 cover. The regular stock 162 cover is slightly lower than the 266 cover, but a lot of later 162s had the 266 cover and dealers regularly used the 266 cover as a replacement part because the 162 parts were phased out quickly.
 
the 630 uses the 162 top end so i'd imagine so. would take some piecing together to make it work on a 625 or 670 though. i have never done any swaps on to jonsereds so can't give a definite answer.
 
Back
Top