• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy Husqvarna 2100 rebirth questions

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kevdoggie

New Member
Joined
Apr 7, 2020
Messages
1
Reaction score
0
Location
B. C canada
So I've never posted on any forum before but I had an idea and was wondering if anyone has ever tried this before... I want to take a 125 four stroke piston roughly the same size as the piston in my 2100 slightly larger but I'll bore the cylinder slightly to allow to fit it. Has anyone ever tried/heard of this plz leave a comment
 
Dukes has a coated piston for this saw, if your bore is in decent shape. I just put one on my 298 last week. Good stuff.


Sent from my iPhone using Tapatalk Pro
 
Hard to bore out a blind cylinder...
Make a removable head cylinder if you are going to start spending money on building a hotsaw.You will need to work with port timing piston heights ect if you start using a different piston
 
Back
Top